FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Head Gasket set with .......
I need head gaskets for my 400 build. It is decked to .005. (verified )
The Fel Pro Q1016 head gasket is .039 compressed thickness The fel pro Q1018 Head gasket is .041 compressed thickness. Dont want to spend more than I need to for a head set. Question is ....: what fel pro complete engine set has these head gaskets in it? Heads are from a 1972 so proper intake set comes into play also. The gaskets are available seperate, but the whole kit will be a bit less expensive...I hope. |
#2
|
||||
|
||||
Latech, I don't know if it is still this way, but quality gasket sets, incuding Fel Pro, used to have the numbers of all of the gaskets on the back of the package.
__________________
Bill 64 GTO, tube chassis w/606" IA tall deck, PG & a pro geared Fab 9". 2750 lbs. 8.2550@164.17-1/4, 5.2901@131.97-1/8, 1.1981-60-ft. 8/10/08 |
#3
|
|||
|
|||
Fel pro Q2806 from Summit has the 1016 head gasket. $139.95
__________________
Frank M. 75 Firebird 68 Firebird 400 RAIII 66 Chevy II 461 Pontiac in AZ |
#4
|
||||
|
||||
I prefer the kits with the 8518 head gasket. I've used dozens of them without a problem.
I've seen too many 1016's that don't seal the water passages. Maybe they've fixed that problem FINALLY, but I'll stick to the $65 gasket sets as long they keep working.
__________________
'73 T/A (clone). Low budget stock headed 8.3:1 455, 222/242 116lsa .443/.435 cam. FAST Sportsman EFI, 315rwhp/385rwtq on 87 octane. 13.12 @103.2, 1.91 60'. '67 Firebird [sold], ; 11.27 @ 119.61, 7.167 @ 96.07, with UD 280/280 (108LSA/ 109 ICL)solid cam. [1.537, 7.233 @93.61, 11.46 @ 115.4 w/ old UD 288/296 108 hydraulic cam] Feb '05 HPP, home-ported "16" D-ports, dished pistons (pump gas only), 3.42 gears, 275/60 DR's, 750DP, T2, full exhaust |
#5
|
||||
|
||||
OK.. thanks Fellas. I have something else to research now .
|
Reply |
|
|