FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Pontiac - Boost Turbo, supercharged, Nitrous, EFI & other Power Adders discussed here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
EFI Injector spacing dimensions
I'm fitting EFI injectors to my Gutsram intake manifold,and rather than fab up a set of fuel rails to fit the injectors,I'd like to use a ready made set of alloy rails off another make of engine, are SBC injectors placed at the same distance apart on the manifold runners? I can't find any info on injector spacing for different engines.
The Gutsram injector bosses are 1 5/8" center to center on each pair of manifold runners, and end to end boss center line distance is 10 3/4" . Thanks. |
#2
|
||||
|
||||
Just buy, from Edelbrock, a set of Injector Rails for a Victor EFI Dominator Intake.
They are cheap too vs paying to have them fabricated. I bought mine on amazon when Edelbrock first brought out the EFI intakes. Butler sells them https://butlerperformance.com/i-3085...ef=brand:99946 Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#3
|
||||
|
||||
Just what I was looking for Tom, thanks.
|
#4
|
||||
|
||||
Glad to help taff2.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
Reply |
|
|