FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Penn Grade 50 Wt. Vs. Valvoline VR1 50 Wt.
Hey Everybody,
Which oil for a straight weight 50 is best for a tired block and bearings? Penn Grade straight 50 mineral or Valvoline VR 1 straight 50 mineral? I don't like my oil pressure and I will get a real block this winter - just want to run it a little more before the snow flies. Thanks, Craig |
#2
|
||||
|
||||
At this point...whatever is cheapest
__________________
GT37 3625lbs..Fastest bench seat, column shift, all steel,no power adders car at Norwalk 1.35 w/29.5x10.5x15 6.42 @ 109 10.09 @ 133 |
#3
|
||||
|
||||
Why not run 20/50 with straight 50 it will take some time to get the oil flowing when it's cold and could cause excessive wear
__________________
Tim Corcoran |
#4
|
|||
|
|||
Either will be fine if it’s old and wore out your not going to see a big difference with either one. Menards does sell VR1 for $4.99 qt.
|
#5
|
||||
|
||||
Hey Thanks Guys.
Take Care, Craig |
Reply |
Thread Tools | |
Display Modes | |
|
|