[69Y97GP]

Does anyone have the GM part number for the plastic filler panel that mounts between the radiator support and bumper on '70 GTOs? I'm noticing that the aftermarket parts have a grain on the underside and the topside looks too shiny and smooth. If I can get the GM part number for this panel I may be able to verify what finish these things should have It should be in Group 8.155 in the old GM parts books. My book is from 1980 and it's not shown in there. Maybe someone with an older parts book will have the number. Thanks guys.

[70gteeo]

I checked my parts book Oct 71.
In section 8.155 this maybe the part number 477613 Discription. Filler frt. end sheet metal brace to bumper. I hope this helps.

[64-3Deuces]

Originally Posted by 70GTEEO

I checked my parts book Oct 71.
In section 8.155 this maybe the part number 477613 Discription. Filler frt. end sheet metal brace to bumper. I hope this helps.

You beat me on the reply…You are correct as that is the part in question as shown in my September 69 Parts Illustration catalog (and same p/n) and is listed for a series 42 which is the 70 GTO.

[69Y97GP]

Thanks 64-3Deuces and 70GTEEO.....I'm going to send an e-mail and see if I can find anything in the drawing archives

[Held for Ransom]

Does your car have A/C or is a RAIII engine (added usage to drawing on 1/29/70)?

Drawing is 477730, 13-2 dated 4-3-70.

[69Y97GP]

Apparently they couldn't find a drawing in the archives under either number. Thanks for the help anyway guys.