FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
The Body Shop TECH General questions that don't fit in any other forum |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Inner Cowl passenger side on 70 GTO
So I am trying to use the passenger side Ames inner and outer Cowl on a 70 GTO, and it seems to stick out from the center of the car 5/8" more than the driver side does.
Does it matter, or do I cut it and weld it to the correct size (which I am not good at)? I will be doing patch work on the driver cowl as well but the passenger side had accident damage up high plus the rust down low. |
#2
|
|||
|
|||
Pics
Existing driver side from body flange to exterior of inner cowl about 6-1/8”
|
#3
|
|||
|
|||
Pic 2
New passenger inner cowl about 6-5/8” from body flange
|
Reply |
Thread Tools | |
Display Modes | |
|
|