Home Menu

Menu


SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference.

          
PY Online Forums - Bringing the Pontiac Hobby Together > BUY, SELL, TRADE Classic PONTIAC "PARTS" > SOLD Parts > Eagle 3"x4.25" crank with matching BHJ balancer 300$
 
Page 1 of 2 1 2
 
Thread Tools Display Modes
  #1  
Old 05-11-2020, 11:50 PM
Dragncar Dragncar is offline
Ultimate Warrior
  
Join Date: Mar 2004
Location: Humbolt County California
Posts: 8,335
Default Eagle 3"x4.25" crank with matching BHJ balancer 300$
The BHJ balancer I have for sale is .001 larger on the snout. I was hoping to sell it to someone who had a crank that would fit. No luck.
Well this balancer is fit by Dan Whitmore to a Eagle cast stroker crank. This is not a average Eagle cast crank. It was made dead on nuts right by Dans crank guy. Many of them new are just good cores, this one was no different. So Dan ground it .010-.010 and stroke checked it and polished the thrust. Its good to go as it. It was also balanced for Butler Ross 4.155 pistons and RPM 6.8 billet rods. it can be re balanced to whatever you like, BUT if you bought those rods and pistons it is a balanced rotating assembly. Balancer like a half to 3/4 thou press fit with this crank.
100$ for the crank
200$ for the balancer. Go together 300$ + shipping.
BHJ balancers sell for over 600$ racers net these days.
I changed my mind to go for 700+ HP on pump gas so went forged. This is fine for guys building a 500--550 HP stout street engine. Won't find a better deal.

  #2  
Old 05-13-2020, 07:21 PM
mikesauto mikesauto is offline
Junior Member
  
Join Date: Aug 2014
Posts: 0
Default Crank
Where you located and how much to ship to Illinois 61081 thanks mike

  #3  
Old 05-13-2020, 11:12 PM
mikesauto mikesauto is offline
Junior Member
  
Join Date: Aug 2014
Posts: 0
Default Crank
And shipping for the balancer too

  #4  
Old 05-14-2020, 01:59 AM
Dragncar Dragncar is offline
Ultimate Warrior
  
Join Date: Mar 2004
Location: Humbolt County California
Posts: 8,335
Default
I will get it all weighed up tomorrow.

  #5  
Old 05-14-2020, 07:36 AM
mikesauto mikesauto is offline
Junior Member
  
Join Date: Aug 2014
Posts: 0
Default
Okey dokey thanks

  #6  
Old 05-15-2020, 04:41 PM
Dragncar Dragncar is offline
Ultimate Warrior
  
Join Date: Mar 2004
Location: Humbolt County California
Posts: 8,335
Default
Its 150$ with balancer in crank box, it will fit.

  #7  
Old 05-17-2020, 11:50 AM
mikesauto mikesauto is offline
Junior Member
  
Join Date: Aug 2014
Posts: 0
Default Crank
I'll take the crank but I'm gonna pass on the balancer shipping is a deal killer these days

  #8  
Old 05-17-2020, 05:31 PM
Dragncar Dragncar is offline
Ultimate Warrior
  
Join Date: Mar 2004
Location: Humbolt County California
Posts: 8,335
Default
Quote:
Originally Posted by mikesauto View Post
I'll take the crank but I'm gonna pass on the balancer shipping is a deal killer these days
Mike, they go together for a reason. That crank was .001 over on the snout. That balancer was fit to that crank and its too big for most other cranks.
If that balancer was not oversize it would have lasted a matter of days by itself. They are VERY expansive now. I am selling the crank with the balancer to get the balancer sold.
People can go buy a new cast Eagle stroker crank for 250-300$ now( I paid 450$ for this crank) but good luck on running it as is. This crank is right,,everything about it.
I am practically giving the crank away to sell the balancer and help someone out Cast cranks are hard to sell because shipping is so high. The first place I went to said 200$ for shipping but I found a place that gave racers a discount and have to drive 15 miles to ship there.
Thanks for you offer to buy the crank but they go together.

  #9  
Old 06-12-2020, 03:35 PM
Dragncar Dragncar is offline
Ultimate Warrior
  
Join Date: Mar 2004
Location: Humbolt County California
Posts: 8,335
Default
Won't find a better deal on something like this.

  #10  
Old 06-12-2020, 03:54 PM
mpmsmuscle's Avatar
mpmsmuscle mpmsmuscle is offline
Member
  
Join Date: Jun 2013
Location: Atoka Tn
Posts: 43
Default
I'm interested. Do you have a Fastenal store in your area. They ship. I am in the Memphis area. Zip 38004

__________________
Pure Pontiac Power!!!
Picture of my actual 69 Judge racing in 1970.
Rare Espresso Brown Ram Air III, 4 speed, manual steering with power disc brakes and factory build sheet indicating 4:88 special order rear axle.
  #11  
Old 06-13-2020, 01:22 AM
Dragncar Dragncar is offline
Ultimate Warrior
  
Join Date: Mar 2004
Location: Humbolt County California
Posts: 8,335
Default
Quote:
Originally Posted by mpmsmuscle View Post
I'm interested. Do you have a Fastenal store in your area. They ship. I am in the Memphis area. Zip 38004
Yes we do, Eureka CA.

  #12  
Old 06-13-2020, 01:44 PM
mpmsmuscle's Avatar
mpmsmuscle mpmsmuscle is offline
Member
  
Join Date: Jun 2013
Location: Atoka Tn
Posts: 43
Default
Fastenal is closed on Saturdays. I will call them on Monday for an estimate on shipping.

__________________
Pure Pontiac Power!!!
Picture of my actual 69 Judge racing in 1970.
Rare Espresso Brown Ram Air III, 4 speed, manual steering with power disc brakes and factory build sheet indicating 4:88 special order rear axle.
  #13  
Old 06-13-2020, 02:10 PM
Dragncar Dragncar is offline
Ultimate Warrior
  
Join Date: Mar 2004
Location: Humbolt County California
Posts: 8,335
Default
Quote:
Originally Posted by mpmsmuscle View Post
Fastenal is closed on Saturdays. I will call them on Monday for an estimate on shipping.
Won't you need size of the box and weight shipping from them ? It will be about 72 lbs + the weight of the balancer. I can fit it in the box, so figure 80lbs or so.

  #14  
Old 06-13-2020, 02:18 PM
mpmsmuscle's Avatar
mpmsmuscle mpmsmuscle is offline
Member
  
Join Date: Jun 2013
Location: Atoka Tn
Posts: 43
Default
Yes, thank you. I was going to use the dimensions of a eagle crankshaft box that I have.

__________________
Pure Pontiac Power!!!
Picture of my actual 69 Judge racing in 1970.
Rare Espresso Brown Ram Air III, 4 speed, manual steering with power disc brakes and factory build sheet indicating 4:88 special order rear axle.
  #15  
Old 06-14-2020, 04:13 AM
Brian Baker's Avatar
Brian Baker Brian Baker is offline
Ultimate Warrior
  
Join Date: Feb 2000
Location: Glen Burnie, MD USA
Posts: 17,184
Default
Interested if current negotiations fail.

__________________
Just a blind squirrel looking for a nut.
  #16  
Old 06-14-2020, 10:35 PM
Jim Moshier's Avatar
Jim Moshier Jim Moshier is offline
Senior Chief
  
Join Date: Dec 1999
Location: Acton, CA
Posts: 297
Default
I’m also interested after Brian ! Thanks

__________________
Jim Moshier

1971 Grand Prix 462ci SD Performance 6x heads
1962 Catalina 389
1968 Firebird 400-455 I haven't decided

"If we ever forget that we're one nation under GOD, then we will be a nation gone under." - Ronald Reagan
  #17  
Old 06-15-2020, 09:52 AM
mpmsmuscle's Avatar
mpmsmuscle mpmsmuscle is offline
Member
  
Join Date: Jun 2013
Location: Atoka Tn
Posts: 43
Default
I am waiting on my freight quote from Fastenal. Evidently they had suspended shipping items during the Covid 19 pandemic. They told me the website should be up and running to get my quote by late afternoon. Thanks!!

__________________
Pure Pontiac Power!!!
Picture of my actual 69 Judge racing in 1970.
Rare Espresso Brown Ram Air III, 4 speed, manual steering with power disc brakes and factory build sheet indicating 4:88 special order rear axle.
  #18  
Old 06-15-2020, 02:14 PM
mpmsmuscle's Avatar
mpmsmuscle mpmsmuscle is offline
Member
  
Join Date: Jun 2013
Location: Atoka Tn
Posts: 43
Default
Unfortunately Fastenal shipping services have been suspended until early July. I will have to pass on the purchase. This is going to be a great deal for someone. I wish I where closer.

__________________
Pure Pontiac Power!!!
Picture of my actual 69 Judge racing in 1970.
Rare Espresso Brown Ram Air III, 4 speed, manual steering with power disc brakes and factory build sheet indicating 4:88 special order rear axle.
  #19  
Old 06-15-2020, 02:53 PM
Dragncar Dragncar is offline
Ultimate Warrior
  
Join Date: Mar 2004
Location: Humbolt County California
Posts: 8,335
Default
Quote:
Originally Posted by mpmsmuscle View Post
Unfortunately Fastenal shipping services have been suspended until early July. I will have to pass on the purchase. This is going to be a great deal for someone. I wish I where closer.
Why can you no go with UPS ? If not B. Baker you are up next.

  #20  
Old 06-15-2020, 06:30 PM
mpmsmuscle's Avatar
mpmsmuscle mpmsmuscle is offline
Member
  
Join Date: Jun 2013
Location: Atoka Tn
Posts: 43
Default
I didn't have enough money to pay you $300 and then $150 for UPS. I have been out of work for over a year with heart attack and quadruple bypass and another heart cath and surgery three weeks ago.

__________________
Pure Pontiac Power!!!
Picture of my actual 69 Judge racing in 1970.
Rare Espresso Brown Ram Air III, 4 speed, manual steering with power disc brakes and factory build sheet indicating 4:88 special order rear axle.
 
Page 1 of 2 1 2

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:31 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Contact Us Home
Copyright © 2017