FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Horn
After noticing that the high note horn quit working on my ‘66 Tempest, I decided to take a look to see if I could fix it. I checked a couple videos on YouTube and took it apart to investigate. As it turns out. It does not seem to be fixable. The diaphragm is shot. Anyone have a NOS diaphragm? Just kidding, although I bet that one is out there somewhere. I was trying to think of a way to repair it (soldering?) but I don’t know if that would work. Any suggestions? I’m checking eBay and found that replacements are expensive and universal. Used could be a crapshoot.
|
#2
|
||||
|
||||
horn
66 67 use the same horns n brackets
9000 497 HI note 9000 498 Lo note .... you can use most any working Hi note and drill spot welds out and swap brackets also I can check tomorrow and see what I have ,,,, just leaving for a day trip to get a truck load of 68 GTO stuff here within the hour |
#3
|
||||
|
||||
|
Reply |
Thread Tools | |
Display Modes | |
|
|