FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
67 GTO console
Anyone tried any repop vinyl console insert sets out there, the one I ordered for the console lid,his/hers and console are WAY too dark, not even close to what's supposed to be on there. Any pics?
Thanks
__________________
https://www.facebook.com/KauffmanRac...6873234225938/ KRE 461,310 CFM 85cc, KB pistons, Eagle rods, Ohio crank KRE custom HR236,Dougs ceramic,Edelbrock Pro Flo 4. Quick Performance 9". 552HP 594 TQ |
#2
|
||||
|
||||
I installed a set from AMES in 1993 and they were a near perfect match for the dash in my '67. But that was 27 years ago!
__________________
Jeff |
#3
|
||||
|
||||
Hmm. Looks way better than what I have...which is a dark walnut kinda color
__________________
https://www.facebook.com/KauffmanRac...6873234225938/ KRE 461,310 CFM 85cc, KB pistons, Eagle rods, Ohio crank KRE custom HR236,Dougs ceramic,Edelbrock Pro Flo 4. Quick Performance 9". 552HP 594 TQ |
#4
|
|||
|
|||
I have an older reproduction set REM G-022 available, I might have an original console piece to check the color / grain match.
|
#5
|
||||
|
||||
That's like what I have,also REM, I have a NOS console top and it is way lighter
__________________
https://www.facebook.com/KauffmanRac...6873234225938/ KRE 461,310 CFM 85cc, KB pistons, Eagle rods, Ohio crank KRE custom HR236,Dougs ceramic,Edelbrock Pro Flo 4. Quick Performance 9". 552HP 594 TQ |
#6
|
|||
|
|||
I had bought the complete console insert kit from Ames and color was great. Bought the console lid as I could not find my original and the insert on that was way dark and terrible. I ended up peeling the insert off the console lid and using what I got with the complete console insert kit. Looks great now. Had to build a jig to get the console lid straight to fit it was twisted so bad from Ames.
__________________
1967 GTO, 467 roller motor, e heads ported, tremec T56 magnum 6 speed and 9" done. EZ EFI 2.0 with FAST dual sync distributor and separate nitrous system done. Track is at 4300 ft elevation. so far a best of 11.95@116. Suspension now getting dialed in...tubular front a arms with dual adjustable coil overs HR Parts n stuff rear bar and whole car lowered 3 inches.. |
#7
|
||||
|
||||
Thanks for that. Any way you could post a picture?
__________________
https://www.facebook.com/KauffmanRac...6873234225938/ KRE 461,310 CFM 85cc, KB pistons, Eagle rods, Ohio crank KRE custom HR236,Dougs ceramic,Edelbrock Pro Flo 4. Quick Performance 9". 552HP 594 TQ |
#8
|
|||
|
|||
Here you go.
__________________
1967 GTO, 467 roller motor, e heads ported, tremec T56 magnum 6 speed and 9" done. EZ EFI 2.0 with FAST dual sync distributor and separate nitrous system done. Track is at 4300 ft elevation. so far a best of 11.95@116. Suspension now getting dialed in...tubular front a arms with dual adjustable coil overs HR Parts n stuff rear bar and whole car lowered 3 inches.. |
#9
|
||||
|
||||
Thank you sir....looks way closer to my dash color, the other dark brown is hidious
__________________
https://www.facebook.com/KauffmanRac...6873234225938/ KRE 461,310 CFM 85cc, KB pistons, Eagle rods, Ohio crank KRE custom HR236,Dougs ceramic,Edelbrock Pro Flo 4. Quick Performance 9". 552HP 594 TQ |
#10
|
|||
|
|||
yes that dark brown was on the lid when I got it from Ames. Ugly is right. I had also bought the wood insert that is premounted on the metal plate. Has the sticky on the back and ready to put on. Never had any luck on the woodgrain bot installed on the plate. I think you can buy the kit or individual pieces. Did the same with my dash front a few years ago and the match is good with that also.
__________________
1967 GTO, 467 roller motor, e heads ported, tremec T56 magnum 6 speed and 9" done. EZ EFI 2.0 with FAST dual sync distributor and separate nitrous system done. Track is at 4300 ft elevation. so far a best of 11.95@116. Suspension now getting dialed in...tubular front a arms with dual adjustable coil overs HR Parts n stuff rear bar and whole car lowered 3 inches.. |
Reply |
|
|