FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
'64 Tripower GTO Throttle Cable Bracket Photo
Does anyone have a picture of an original throttle cable bracket with the 1/2" spacer welded in? I have one picture, but it is very small and I'd like more detail. Note that it appears that the top portion was positioned forward by about 3/16". The second picture is of a bracket that has been cut but not welded.
I am making a batch of these brackets and would like to get them as correct as possible.
__________________
BONESTOCK GOATS '64 GTO Tripower Hardtop (Wife's Car) '64 GTO Tripower Post Coupe (My Car) '99 Bonneville SE Sedan |
#2
|
||||
|
||||
__________________
1964 Tempest Coupe LS3/4L70E/3.42 1964 Le Mans Convertible 421 HO/TH350/2.56 2002 WS6 Convertible LS1/4L60E/3.23 |
#3
|
||||
|
||||
Thanks, Bart.
They didn't do a really nice looking weld, did they? Here is a better picture than my two on the OP. I believe this is an original, too. Note the top portion is forward of the spacer and bottom portion.
__________________
BONESTOCK GOATS '64 GTO Tripower Hardtop (Wife's Car) '64 GTO Tripower Post Coupe (My Car) '99 Bonneville SE Sedan |
Reply |
Thread Tools | |
Display Modes | |
|
|