FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Core Support Headlight Harness Grommet
1968 GTO with hide-aways:
Does anyone know if they reproduce the grommet that goes in the square hole in the core support (driver side) where the headlight harness feeds through? I have attached some pictures. Thanks, Bob |
#2
|
||||
|
||||
That's the same for most GM cars late 60's thru late 70's. If you can't find any in salvage yards by you I'm sure I can dig one up here.
Someone likely does repo them, I've just never looked for one! |
#3
|
||||
|
||||
I grabbed a spare from the junkyard a few years ago. Didn't know they were used on other cars. I got this one from a '68 LeMans.
__________________
Greg Reid Palmetto, Georgia |
#4
|
||||
|
||||
I can
dig a decent one up this weekend
they are just not here at the house......... if your still looking Scott |
#5
|
|||
|
|||
Scoot, that would be great. I will send you a PM.
Bob |
#6
|
||||
|
||||
pulled a clean one
Bob
pulled a clean one off a rad support I had here at the house the spot (lower left) is water I scrubbed the dirt off... was not quite dry..... all hooks on the back are good ... never painted.... I will send it off tomorrow when you get it let me know got your address thru your pm to me usps tomorrow ........ shipping cost is fine and maybe a coffee if that works ..... Scott 4-5 days |
#7
|
|||
|
|||
Scott, I really appreciate this. Will let you know when I receive. Will send the postage and a large coffee.
Thanks again, Bob |
Reply |
|
|