Reply
 
Thread Tools Display Modes
  #1  
Old 03-14-2023, 06:29 AM
J GLASGO's Avatar
J GLASGO J GLASGO is offline
Ultimate Warrior
 
Join Date: Jun 2004
Posts: 1,021
Default Wtb 3.23 gears for 8.2

Looking for a nice set of 3.23 gears for 8.2. Posi Carrier also. John 330 618-6583

__________________
WWW.GLASGOPERFORMANCE.COM. Updated... Sort of!
  #2  
Old 03-14-2023, 12:40 PM
getmygoat's Avatar
getmygoat getmygoat is offline
Ultimate Warrior
 
Join Date: May 2003
Location: Huntsville Alabama
Posts: 2,230
Default

I had contacted a major gear maker a while back about doing a new run of 3:23 ratio gear sets. Seems like there is pent up demand for this.

I believe it would have been about $500 per set if they made > 40 sets.

__________________
1969 Judge, 4-speed, CR/Parchment, Quasi-Survivor, #'s match - under restoration
  #3  
Old 03-14-2023, 07:03 PM
694.1 694.1 is offline
Ultimate Warrior
 
Join Date: Jul 2010
Location: SE WI
Posts: 1,372
Default

Considering they fit Olds too, 40 sets would be only a gesture.
That is a bit of an investment though...

__________________
"At no time did we exceed 175 mph.”
Dan Gurney's truthful response to his and Brock Yate's winning of the first ever Cannonball Baker Sea-to-Shining Sea...

Still have my 1st Firebird
7th Firebird
57 Starchief
  #4  
Old 03-18-2023, 11:32 AM
markvecc markvecc is offline
Junior Member
 
Join Date: May 2010
Posts: 15
Default

I have a set of 3.23 gears still attached to an open carrier that came out of a 66 GTO if that is what you are looking for. I also have the spider gears and clutches to convert an open carrier to a posi unit.
Attached Thumbnails
Click image for larger version

Name:	IMG_1613.jpg
Views:	79
Size:	56.8 KB
ID:	609046   Click image for larger version

Name:	IMG_1614.jpg
Views:	64
Size:	74.6 KB
ID:	609047   Click image for larger version

Name:	IMG_1615.jpg
Views:	68
Size:	65.6 KB
ID:	609048   Click image for larger version

Name:	IMG_1616.jpg
Views:	78
Size:	60.3 KB
ID:	609049   Click image for larger version

Name:	IMG_1617.jpg
Views:	67
Size:	61.8 KB
ID:	609050  


  #5  
Old 03-22-2023, 03:02 AM
KGTO's Avatar
KGTO KGTO is offline
Ultimate Warrior
 
Join Date: Mar 2001
Location: Coeur d'Alene, ID.usa
Posts: 1,704
Default

I will also have a set and carrier coming out of a one owner 70 GTO in the next week or so.

__________________
1967 GTO 416 5-spd streetcar 11's on HP low 10's 150 shot
1965 GTO 10-71 Littlefield high-helix retro/Bird (untuned) 8.44 @159 3500+lbs 10.5W's SOLD!
1964 421 GP-Sold
6.0 cert. Fiat bodied altered blown alcohol Pontiac IAII-Sold
  #6  
Old 03-26-2023, 10:28 AM
72pontiac's Avatar
72pontiac 72pontiac is offline
Chief Ponti-yacker
 
Join Date: Jun 2006
Location: Waterford Mi.
Posts: 674
Default

Quote:
Originally Posted by markvecc View Post
I have a set of 3.23 gears still attached to an open carrier that came out of a 66 GTO if that is what you are looking for. I also have the spider gears and clutches to convert an open carrier to a posi unit.
parts to make an open into a posi?

The Following User Says Thank You to 72pontiac For This Useful Post:
  #7  
Old 03-26-2023, 10:51 AM
'ol Pinion head 'ol Pinion head is offline
Ultimate Warrior
 
Join Date: Apr 2000
Location: INJUN Territory, Red State Merica!
Posts: 9,581
Default

The above pictured clutches & side gears can only be used in the style of posi carrier, they came out of. They cannot be used in a single track carrier.

The round eared factory Eaton clutches are typical to being used in posi carriers for 8 7/8 P series, 8 7/8 MP series, 12 bolt Chevy car or 12 bolt Chevy truck. Different designs of posi side gears were designed to accept that style of clutch, 28, 30, & 31 spline side gears w those regular clutch type sets, as well as governor lock posi units.

__________________
Buzzards gotta eat... same as worms.

Last edited by 'ol Pinion head; 03-26-2023 at 11:01 AM.
  #8  
Old 03-26-2023, 10:58 AM
'ol Pinion head 'ol Pinion head is offline
Ultimate Warrior
 
Join Date: Apr 2000
Location: INJUN Territory, Red State Merica!
Posts: 9,581
Default

Quote:
Originally Posted by KGTO View Post
I will also have a set and carrier coming out of a one owner 70 GTO in the next week or so.
'70-72 PONTIAC 8.2 10 bolt gearsets took a 1/16" larger diam ring gear which is LH thread.
This style of Pontiac 8.2 gear set was introduced in late '69 Birds. Just something to note if trying to EASILY mate with an earlier style 8.2 Pontiac carrier.

__________________
Buzzards gotta eat... same as worms.
  #9  
Old 04-12-2023, 06:44 AM
J GLASGO's Avatar
J GLASGO J GLASGO is offline
Ultimate Warrior
 
Join Date: Jun 2004
Posts: 1,021
Default

Still need these gears.!!

__________________
WWW.GLASGOPERFORMANCE.COM. Updated... Sort of!
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:47 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017