FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Aftermarket Carb for 4 cylinder
Has anyone used an aftermarket carburetor for their 4 cylinder. I cant seem to get my 63 to run right, hard start,rough idle, poor acceleration ETC. Any ideas or suggestions would be appreciated.
Thanks Tony |
#2
|
|||
|
|||
Is it a 1bbl or 4 bbl engine?When I was doing my 1 bbl engine the factory carb was missing and found a NOS one on ebay.I think there are carbs that were used on some early 6 cyc engines that are compatible.Not sure about the 4 bbl engines.Tom
|
#3
|
|||
|
|||
Its a 1 barrel
|
#4
|
||||
|
||||
I had many of the same problems with my 1bbl equipped 62. Found a similar carb at swap meet that appeared to be rebuilt by a carb guy. The 62 ran better than it ever had. Years ago Napa sold rebuilt 1bbls. I bought one for one of my Nissan Patrols so that might be worth a look? Good luck!
__________________
DragStarLeMans |
Reply |
Thread Tools | |
Display Modes | |
|
|