FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Console clock removel
Ok so whats the secret to getting the console clock out from the radio bezel?
I know it just seems to snap in place per the shop manual photo but I have tried and tried and I cant get it to release. I push down on top of the clock bezel while kind of pulling out and it wont release.....I can only push down so much as it's a little awkward. I don't want to stick anything in there for fear of scratching or cracking either the clock or radio bezel. Am I doing it wrong? Last edited by abefromen; 08-03-2019 at 05:57 PM. |
#2
|
|||
|
|||
Push down on the top to release the three tabs on top, then pull away from the bezel and lift to release the bottom tabs
__________________
Jeff Ianitello |
#3
|
||||
|
||||
They literally just snap into place.
__________________
1976 LeMans B09 Freeway Enforcer, 455/M40 Smokey 1977 Trans Am, 400/M21 Black/Gold Bandit. 44K actual miles 2017 Sierra SLT 1500 Z71 4X4 2019 Canyon SLT Crew 4X4 |
#4
|
||||
|
||||
After looking at things closely I learned it was the opposite........the bottom comes out first.
|
Reply |
|
|