FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Seat Belt Retractor QUestions
I always thought and was maybe told the tag on seat belt with retractors went face down, like on your lap. Also the slot in the housing was closer to the seat than the door panel. Are both of these right or? Same on all years? Reason I ask is because I have original, unmolested retractors that have the slot in the housings on both the inside and outside with the tag down and vicea versa. Answers.
__________________
Practicing social distancing for 65+ years |
#2
|
||||
|
||||
Dr. Mr. Zboo,
1966 Fremont built. 1) LH retracted. Two slots, one on outside, one on inside. Squeeze to remove cover. 2) RH pulled out. Tag face down, facing lap. Hope this helped. Chris.
__________________
1) 65 GTO Survivor. 43,440 Original Miles. “Factory” Mayfair Maize Paint with Black Pinstripe, Black Cordova Top, Black Interior, OEM Numbers Matching Powertrain. Purchased from the Lady that bought it new. Baltimore Built (11A). 2) 66 GTO Survivor. “Factory” Cameo Ivory Paint with Red Pinstripe, Red Interior. OEM Numbers Matching Powertrain. Tri-Power (OEM Vacuum Linkage), Automatic "YR" code (1759 Produced). Fremont Built (01B), with the Rare 614 Option. |
#3
|
||||
|
||||
Revision.
About that “slot”. Bob, Assuming the slot question pertains to where the belt comes out. Both sides have the slot towards the seat as seen above.
__________________
1) 65 GTO Survivor. 43,440 Original Miles. “Factory” Mayfair Maize Paint with Black Pinstripe, Black Cordova Top, Black Interior, OEM Numbers Matching Powertrain. Purchased from the Lady that bought it new. Baltimore Built (11A). 2) 66 GTO Survivor. “Factory” Cameo Ivory Paint with Red Pinstripe, Red Interior. OEM Numbers Matching Powertrain. Tri-Power (OEM Vacuum Linkage), Automatic "YR" code (1759 Produced). Fremont Built (01B), with the Rare 614 Option. |
Reply |
Thread Tools | |
Display Modes | |
|
|