[dmn455s-10]

HELLO NEW TOO THIS INTERNET THING
SO PLEASE BARE WITH ME
I HAVE A S-10 BLAZER WITH A PONTIAC 455 ON THIS IT HAS A REMOTE OIL UNIT .
I LIKE TO ADD HEADERS . IM THINKING THAT HEADERS FOR A G BODY CAR MAY WORK BECAUSE OF THE NARROW FRAME THAT G BODY CARS HAVE ?

MORE IMFO. ON S-10 IT HAS PONTIAC 455 WITH A TURBO 400 STAGE 3 SHIFT KIT , 2000 STALL, 340 POSI STOCK REAR END,WITH 2 1/2 EXHUEST AND OH YES A STARSHIFTER OTHER THEN THAT ITS ALL STOCK.

[dmn455s-10]

HELLO NEW TOO THIS INTERNET THING
SO PLEASE BARE WITH ME
I HAVE A S-10 BLAZER WITH A PONTIAC 455 ON THIS IT HAS A REMOTE OIL UNIT .
I LIKE TO ADD HEADERS . IM THINKING THAT HEADERS FOR A G BODY CAR MAY WORK BECAUSE OF THE NARROW FRAME THAT G BODY CARS HAVE ?

MORE IMFO. ON S-10 IT HAS PONTIAC 455 WITH A TURBO 400 STAGE 3 SHIFT KIT , 2000 STALL, 340 POSI STOCK REAR END,WITH 2 1/2 EXHUEST AND OH YES A STARSHIFTER OTHER THEN THAT ITS ALL STOCK.

[78lemans]

i'm not real sure on you s-10 but on my 83 trans am with the 455 we used 2nd gen fire bird headers, we had to do alot of beating and some moving but they finaly worked. we tried about 6 sets of headers we had laying around our shop till we foung a set that looked like they would work. on my 78 lemans we tryed all the same headers and not a one would work, the frame on them are real narrow, they look like you could put any header on it till you get down and try. anyway good luck i would check swap meets and buy a few sets as cheap as you can and try them. my headers were hooker comp's that i got for $5.