FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
1967 400 SHORT BLOCK, ALL NEW PARTS
I'm out of space and reluctantly letting go of a bunch of Pontiac parts. This is a freshly machined YC code Pontiac 400 block, crankshaft and cylinder heads. The block casting number is 9790071 and date is I267 (September 26, 1967). It has been cleaned, magnafluxed, bored +.060", align bored and new cam bearings installed. The crank was turned -.030" on rods and mains. Includes properly sized rod and main bearings, and piston rings. The matched set of 4X 1H heads have been redone and are both dated K013 (November 1, 1973). The following parts are new and were all ordered from Jegs at a cost of $1800, not including block, crank, heads or any of the machine work.
Eagle forged H beam connecting rods ($523.99) Speed Pro forged pistons ($655.99) Total Seal gapless piston rings ($147.99) Clevite 77 rod bearings ($123.92) Clevite 77 main bearings ($82.99) TCI flex plate ($239.99) There's also an extra set of speed pro piston rings. All the parts were purchased for this build. The machine work was done a couple years ago and the block and crank were coated in Cosmoline. Unfortunately, I'm unable to find the main caps, so they'll need to be replaced. I can strap the parts on a pallet and deliver to a shipper within 50 miles of Melbourne, Florida but buyer is responsible for arranging and paying for shipping. Can also be picked up in Central Florida or I can deliver in the Orlando/Central Florida area or along the I-95 corridor between Central Florida and West Palm Beach after payment received. $1800 obo. I have many more pics if interested. |
#2
|
|||
|
|||
More pics...
|
#3
|
|||
|
|||
More pics.
|
#4
|
|||
|
|||
Rods and flex plate sold. Pistons and both sets of rings, $300 shipped in US.
Freshly machined block, crank, heads, rod and main bearings, $400 picked up, $450 if buyer arranges and pays shipping. Will put on a pallet and deliver to shipper in Melbourne, Florida area. |
#5
|
|||
|
|||
Sold.
|
Reply |
|
|