FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Need help identifying these parts please.
I purchased this car (1965 GTO) in parts. Need some help identifying a few of them. Would appreciate any assistance. Pictures attached herein.
|
#2
|
||||
|
||||
If you haven’t already, I recommend getting the GTO Restoration Guide.
I recall there may be an illustration showing these items behind the front bumper. I believe most of these items pertain to an air condition car, plus a brace for the hood latch??
__________________
1) 65 GTO Survivor. 43,440 Original Miles. “Factory” Mayfair Maize Paint with Black Pinstripe, Black Cordova Top, Black Interior, OEM Numbers Matching Powertrain. Purchased from the Lady that bought it new. Baltimore Built (11A). 2) 66 GTO Survivor. “Factory” Cameo Ivory Paint with Red Pinstripe, Red Interior. OEM Numbers Matching Powertrain. Tri-Power (OEM Vacuum Linkage), Automatic "YR" code (1759 Produced). Fremont Built (01B), with the Rare 614 Option. |
#3
|
||||
|
||||
#1 #2 look like side baffles that are on core support . right/left . other parts as said may be for a/c car. not familiar with them
|
#4
|
|||
|
|||
Thank you for the feedback. I did positively identify 1 and 2 as air baffles that fit on the lower core support. Any further feedback on 4, 5, 6 and 7 would be appreciated.
|
#5
|
||||
|
||||
6 and 7 are also for air conditioner cars, and get a rubber flap stapled to them. They screw to the "rock shield" that goes in front of the tire on the bottom of the fender. I am just finishing a full rotisserie resto on my 65, and i don't have a 4 or 5 on my car anywhere. 1 and 2 are under the rubber piece with the stapes in this picture.
__________________
"I know just enough to keep me here, but not enough to get me out" |
#6
|
|||
|
|||
Thank you VERY much for the replies. Very, very helpful. Do any of you recognize this part? It's another that came with the car which I don't recognize. Thank you.
|
#7
|
||||
|
||||
This is a what we in body shop world call a crash book. list parts and labor for estimating. its old, like 1971 . as you can see some parts are marked Disc. even then
But if you look your part #5 is shown as a brace. I do not see your #4 but thinking it's also on core support. The last part you show looks like a bracket also . I'm thinking there are two . as right and left . these could be to mount rubber duct . all I got . good luck Don |
#8
|
||||
|
||||
Don - that diagram in the post above is not for a 1965 GTO - possibly a bracket for a 64?
__________________
"I know just enough to keep me here, but not enough to get me out" |
#9
|
||||
|
||||
maybe but his #5 looks to show in diagram
|
#10
|
||||
|
||||
yes that is the 64 diagram . but looks like the bracket he shows . see pic of 65
|
#11
|
||||
|
||||
Pic from restoration guide in either case there are no pics of condenser or mounting
|
Reply |
|
|