FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
1972 conv top switch
When I push the UP/DOWN button on my conv top switch works in reverse
So when I hit the down button the top will go up into the trunk and when I hit the UP button the top will come out of the trunk Is it working in reverse and how do I fix it?? |
#2
|
||||
|
||||
As you describe it I think it is working correctly.
__________________
My Pontiac is a '57 GMC with its original 347" Pontiac V8 and dual-range Hydra-Matic. |
#3
|
|||
|
|||
I described it wrong-- when you hit the down button the top will come up from the trunk and down onto the windshield
and vice versa when you hit the up button |
#4
|
||||
|
||||
sounds like the "red and green" ? wires need swapped in the trunk in the plug
we had a repro motor that did the same a few years back... |
#5
|
|||
|
|||
I will check in the trunk thanks
|
#6
|
|||
|
|||
So I looked in the trunk to switch the wires -- but it is a molded piece and can't change it there
I am now looking at the switch under the dash to see if you can remove the wires in the back and reverse them and they do not move--not sure if they are soldered or removable Should I buy a new switch or does anybody know if they removable?? |
#7
|
|||
|
|||
Hooray!! Its fixed, I was able to switch the wires under the dash and
it now works correctly Thanks Bill |
Reply |
|
|