FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
horn wire replacement on a tilt column
Hi all , on my 65 GTO, the horn wire is missing in the steering column and does not reach the horse shoe connector; does anyone have an idea how to replace it? my problem is how to remove the brass collector shown on the picture;
I could take off the nut, but then, I don't know how to go further on... any tip will be welcome; my column is a tilt one with shifter on the floor; and the turn signal ids made by a steel cable actuating a switch on the bottom of the steering column; so only the horn wire is crossing the column; thanks in advance for your help; |
Thread Tools | |
Display Modes | |
|
|