FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
quality difference (ring & pinion)
The last time I was in the market for a (replcement) ring and pinion for my Formula, I just bought a brand I recognized;
I had no idea there were multiple brands out there. I have since read the occasional post here and there about differing quality of different brands of ring and pinion sets. I will be in the market for a set (3.90:1) and wanted to get the opinion of PY members as to pros and cons of one brand over another. Attached is a screen shot from my ebay app showing three different brands of the same ratio... I sincerely appreciate any opinions that members care to share with me
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) |
|
|