FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
Thread Tools | Display Modes |
#41
|
||||
|
||||
Going to Ebay
__________________
Carburetor building & modification services Servicing the Pontiac community over 20 years |
#42
|
||||
|
||||
On Ebay
__________________
Carburetor building & modification services Servicing the Pontiac community over 20 years |
#43
|
||||
|
||||
$3,995. plus ride
__________________
Carburetor building & modification services Servicing the Pontiac community over 20 years |
#44
|
||||
|
||||
Current pics
__________________
Carburetor building & modification services Servicing the Pontiac community over 20 years |
#45
|
||||
|
||||
Original 73-74 Pontiac SD-455 Cylinder heads.
Sold as a pair Rare casting with full part number (485216) cast rather than #16 on exhaust ports as stated in Pontiac Pete McCarthy book. Fully rebuilt and ready to bolt- on. These have had a full valve job and gasket surface cleaned for flatness, all new parts including new Ferrea Stainless Steel valves guides, locks, retainers, seals Springs are for a Hyd roller camshaft Previous builder had filled exhaust crossovers to increase performance and balance exhaust pulse. SD-455 heads have pushrod tubes that break into intake ports from the factory. Previous builder applied some epoxy to some ports where tubes break into ports to assure seal and possibly improve flow
__________________
Carburetor building & modification services Servicing the Pontiac community over 20 years Last edited by shaker455; 11-14-2018 at 12:20 AM. |
#46
|
||||
|
||||
SOLD!
Thanks PY!
__________________
Carburetor building & modification services Servicing the Pontiac community over 20 years |
|
|