#1  
Old 04-24-2020, 05:29 PM
ddella22 ddella22 is offline
Member
 
Join Date: Nov 2012
Location: Summerville, SC
Posts: 54
Default Race parts stash

Performance parts Like new
Located in Charleston SC

455 rotating assembly, 60 over Ross forged pistons (XL421P), GRP billet aluminum rods (33976), stock 455 crank 4.210 stroke 3.25 main (496455). $1450

72 455 block with billet 4 bolt main caps and ARP studs, broken lifter bore, had a high lift solid roller and no brace will sell just the caps with or without the block I just thought someone may be able to fix it $300

Moroso deep sump oil pan 8qt capacity with pickup $175

Victor edelbrock intake, dominator flange $295

Billet thermostat housing $25

SCAT SFI approved flexplate $50

Front Engine plate $45

Aluminum valley pan no pcv $40

Roll master double roller timing chain, multiple key ways $75

Comp cams solid roller cam 306C-R8 QB4813 $75

Hedman Hustler Round port headers from 70s Ventura $150

I will add some more performance parts as I pull them out and get pics
Attached Thumbnails
Click image for larger version

Name:	C8964E18-E73D-48A1-B3BE-0D3777F8ADCB.jpg
Views:	582
Size:	95.9 KB
ID:	538319   Click image for larger version

Name:	05EF1D14-5992-47C9-8FE0-77042EF20FD2.jpg
Views:	593
Size:	89.8 KB
ID:	538320   Click image for larger version

Name:	8D748AD9-771E-4083-B2CC-9DD49A585B7F.jpg
Views:	595
Size:	85.0 KB
ID:	538321   Click image for larger version

Name:	33E9E2F1-CE46-4CAA-B437-A50100F8D5E3.jpg
Views:	617
Size:	75.3 KB
ID:	538322   Click image for larger version

Name:	E4A2371E-888B-495B-B2F3-59E70B139D0A.jpg
Views:	467
Size:	109.3 KB
ID:	538324  


  #2  
Old 04-24-2020, 05:49 PM
duke455's Avatar
duke455 duke455 is offline
Senior Chief
 
Join Date: Dec 2004
Posts: 426
Default

How much for the caps and studs ?

  #3  
Old 04-24-2020, 06:40 PM
ddella22 ddella22 is offline
Member
 
Join Date: Nov 2012
Location: Summerville, SC
Posts: 54
Default

Quote:
Originally Posted by duke455 View Post
How much for the caps and studs ?
$300, just throwing the block in for free if you wanted it but I realize shipping the block is expensive so I’ll pull the caps and ship them and junk the block if need be

The Following User Says Thank You to ddella22 For This Useful Post:
  #4  
Old 04-24-2020, 06:44 PM
Rob Roy Rob Roy is offline
Member
 
Join Date: Dec 2002
Location: Oswego,NY
Posts: 66
Default

Any pics of engine plate? Thanks in advance
Rob

  #5  
Old 04-24-2020, 06:51 PM
ddella22 ddella22 is offline
Member
 
Join Date: Nov 2012
Location: Summerville, SC
Posts: 54
Default

Quote:
Originally Posted by Rob Roy View Post
Any pics of engine plate? Thanks in advance
Rob
Pic attached
Attached Thumbnails
Click image for larger version

Name:	C05022FE-BC7C-40F2-AF88-B47744982BB7.jpg
Views:	513
Size:	138.6 KB
ID:	538327  

  #6  
Old 04-24-2020, 08:24 PM
CatalinaMike CatalinaMike is offline
Member
 
Join Date: Jun 2018
Location: Pahrump, NV
Posts: 57
Default

Is the timing chain new? Pics of the flexplate and thermostat housing please. Interested in all 3

  #7  
Old 04-24-2020, 08:34 PM
ddella22 ddella22 is offline
Member
 
Join Date: Nov 2012
Location: Summerville, SC
Posts: 54
Default

Quote:
Originally Posted by CatalinaMike View Post
Is the timing chain new? Pics of the flexplate and thermostat housing please. Interested in all 3
Everything had 8 passes on it until the lifter bore broke, pics attached
Attached Thumbnails
Click image for larger version

Name:	361177E3-7A39-46E2-A2E3-634E13A3BB7E.jpg
Views:	464
Size:	59.4 KB
ID:	538338   Click image for larger version

Name:	44E3019E-62DA-4436-ADE1-C067B837A191.jpg
Views:	445
Size:	69.2 KB
ID:	538339  

  #8  
Old 04-24-2020, 09:34 PM
catalina_dream's Avatar
catalina_dream catalina_dream is offline
Senior Chief
 
Join Date: Aug 2004
Location: SW Suburbs of Chicago
Posts: 277
Default Info Request

Any pictures of the rods and pistons from the other side? Maybe a close up of a rod and piston? Is the crank standard? Part number? Oil pan and pickup pictures? Whose pickup?

Thanks - Kevin

__________________
1972 Firebird
462, 6X heads, RA4 cam, iron intake, Cliff's Q-Jet
3925 race weight
Best of 12.88 @ 105 so far
  #9  
Old 04-24-2020, 09:45 PM
ddella22 ddella22 is offline
Member
 
Join Date: Nov 2012
Location: Summerville, SC
Posts: 54
Default

Quote:
Originally Posted by catalina_dream View Post
Any pictures of the rods and pistons from the other side? Maybe a close up of a rod and piston? Is the crank standard? Part number? Oil pan and pickup pictures? Whose pickup?

Thanks - Kevin
Pm me your cell # and I can send over the pics
Crank is cut 10 on main and rod journals 496455 is the part number

  #10  
Old 04-24-2020, 11:40 PM
blueghoast's Avatar
blueghoast blueghoast is offline
Ultimate Warrior
 
Join Date: Jan 2011
Posts: 2,398
Default

Intrested in the cam, got any specs on it. Post the card if you can.

GT.

  #11  
Old 04-25-2020, 06:55 AM
duke455's Avatar
duke455 duke455 is offline
Senior Chief
 
Join Date: Dec 2004
Posts: 426
Default

PM sent on the caps

  #12  
Old 04-25-2020, 09:00 AM
ddella22 ddella22 is offline
Member
 
Join Date: Nov 2012
Location: Summerville, SC
Posts: 54
Default

Quote:
Originally Posted by blueghoast View Post
Intrested in the cam, got any specs on it. Post the card if you can.

GT.
Sorry I don’t have a cam card, all I have is the numbers off the end that I posted and that it’s a comp cams

  #13  
Old 04-25-2020, 09:35 AM
catalina_dream's Avatar
catalina_dream catalina_dream is offline
Senior Chief
 
Join Date: Aug 2004
Location: SW Suburbs of Chicago
Posts: 277
Default

PM sent

__________________
1972 Firebird
462, 6X heads, RA4 cam, iron intake, Cliff's Q-Jet
3925 race weight
Best of 12.88 @ 105 so far
  #14  
Old 04-25-2020, 12:33 PM
ddella22 ddella22 is offline
Member
 
Join Date: Nov 2012
Location: Summerville, SC
Posts: 54
Default

Victor intake, flexplate, and main caps all sold

  #15  
Old 04-25-2020, 10:48 PM
HoneyHush HoneyHush is offline
Senior Member
 
Join Date: Mar 2014
Location: Florence,Ky.
Posts: 246
Default

I will take the cam if blueghoast doesn’t

  #16  
Old 04-25-2020, 11:56 PM
HoneyHush HoneyHush is offline
Senior Member
 
Join Date: Mar 2014
Location: Florence,Ky.
Posts: 246
Default

From what I found the cam is 275/278 .050 with 688/693 lift with 1.65’s. On a 104

  #17  
Old 04-26-2020, 07:34 AM
PAUL K's Avatar
PAUL K PAUL K is offline
Ultimate Warrior
 
Join Date: Feb 2004
Location: Sugar Grove IL USA
Posts: 6,283
Default

The R8 should mean the cam is. Solid Roller ground on a 108 LSA

__________________
Go fast, see Elvis!
www.facebook.com/PaulKnippensMuscleMotors
  #18  
Old 04-26-2020, 09:44 AM
HoneyHush HoneyHush is offline
Senior Member
 
Join Date: Mar 2014
Location: Florence,Ky.
Posts: 246
Default

If it posts the pic here is the cam. Hope it is a 108 because 104 is tight but it a drag race cam.
Attached Thumbnails
Click image for larger version

Name:	3D72536E-DDE2-4B5F-A601-1AB274DC1F73.jpg
Views:	368
Size:	100.5 KB
ID:	538395  

  #19  
Old 04-29-2020, 10:17 PM
blueghoast's Avatar
blueghoast blueghoast is offline
Ultimate Warrior
 
Join Date: Jan 2011
Posts: 2,398
Default

Quote:
Originally Posted by HoneyHush View Post
If it posts the pic here is the cam. Hope it is a 108 because 104 is tight but it a drag race cam.
Go ahead on the cam buddy.

GT

  #20  
Old 05-01-2020, 03:09 PM
ddella22 ddella22 is offline
Member
 
Join Date: Nov 2012
Location: Summerville, SC
Posts: 54
Default

Front engine plate sold

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:02 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017