SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference.

          
 
 
Thread Tools Display Modes
  #1  
Old 06-20-2020, 12:53 PM
avman avman is offline
Senior Chief
 
Join Date: Nov 2011
Location: New Orleans, La.
Posts: 314
Arrow 421 .030 over JE Forged Aluminum pistons, balanced rods, appx 11:1 CR

These .030 overbore forged aluminum JE pistons came out of our 1965 421 when one of the big end rod bearings started making noise. Caught before any engine damage occurred. Went with RaceTech .035 over custom forged aluminum pistons with a slight dish to drop CR to 10:1 (iron heads) and Eagle H-Beam rods.
I expect the pistons are 100% fine, 7 of the 8 rods are fine, the other one had a bad big end bearing, so not sure about that one.
The attention to detail and the number of parts of the engine that were upgraded in the build that included these pistons and rods show top notch parts and labor.
I'm running out of room, and I'd hate to throw these away.
Selling all together. $90 OBO plus actual shipping cost, probably $25
Attached Thumbnails
Click image for larger version

Name:	20200620_105239.jpg
Views:	206
Size:	66.9 KB
ID:	542782   Click image for larger version

Name:	20200620_105226.jpg
Views:	201
Size:	66.4 KB
ID:	542783   Click image for larger version

Name:	20200620_105154.jpg
Views:	212
Size:	63.2 KB
ID:	542784  

  #2  
Old 06-20-2020, 10:20 PM
Johnny406's Avatar
Johnny406 Johnny406 is offline
Ultimate Warrior
 
Join Date: Jan 2006
Location: Colorado Springs, CO
Posts: 2,874
Default

PM sent

__________________
Johnny US Army Retired
1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph
1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car.
1980 Formula 350 Pontiac back burner project
1972 LeMans 350 Pontiac
The Following User Says Thank You to Johnny406 For This Useful Post:
  #3  
Old 06-21-2020, 12:18 AM
ed boersma's Avatar
ed boersma ed boersma is offline
Senior Member
 
Join Date: Jan 2002
Location: Minneapolis, MN
Posts: 138
Default 421 Pistons

PM sent

The Following User Says Thank You to ed boersma For This Useful Post:
  #4  
Old 06-21-2020, 12:43 AM
avman avman is offline
Senior Chief
 
Join Date: Nov 2011
Location: New Orleans, La.
Posts: 314
Default

2 buyers, thanks PY forum!
I'm glad they aren't going to waste.
There are a number of signs that one of the previous owners did a VERY nice build. I took it to the next level, and right now, the Wraptor serpentine belt and accessory system and Vintage Air AC system and Dakota Digital gauges are going in.
Next up is the TKO600 5 speed that's in a box in the garage, Hydramax hydraulic T.O. bearing, useful now for easier clutch/PP control, but mainly to set it up for the HitMaster launch control system. My Roadrunner is having the Hydramax and HitMaster installed now, and if it is all I expect it to be, I can add it to the TKO600 easily so "the Mrs." can easily and successfully launch her car. Also replacing the Quick Performance 9" axle housing with one that has the CORRECT adjustable LCA lift bar brackets, is set up exclusively for coilovers, and is stock width vs 1" narrower (which I just can't make work)

  #5  
Old 06-24-2020, 01:19 PM
avman avman is offline
Senior Chief
 
Join Date: Nov 2011
Location: New Orleans, La.
Posts: 314
Default

Johnny406
I've tried to get in touch with you a few ways. Please reply here or a PM or text or phone call. I don't want our agreement to go excommunicado..
Attached Thumbnails
Click image for larger version

Name:	Screenshot_20200624-121908_Gallery.jpg
Views:	96
Size:	34.5 KB
ID:	543234  

  #6  
Old 09-07-2020, 12:10 PM
avman avman is offline
Senior Chief
 
Join Date: Nov 2011
Location: New Orleans, La.
Posts: 314
Default

Ok, after way too many delays, 2nd house construction, COVID-19, one man business to manage, and a couple of hurricanes, I've taken Labor Day to degrease the pistons and rods. I'm not going to separate them, as they appear to be pressed in.
I'm going to reach out to Johnny406 again and ed boardman.
I'm sorry I got so far behind on this. I'll post again if they are still available. Thanks

  #7  
Old 09-07-2020, 12:34 PM
avman avman is offline
Senior Chief
 
Join Date: Nov 2011
Location: New Orleans, La.
Posts: 314
Default

Ok, Johnny406 is taking them. Ed is backup.
Please look for more parts for sale from our 65 GTO soon. Radiator, brackets, pulleys, etc. Basically all the stuff that the Wraptor system and Vintage Air has replaced. Also Rally gauges and other stuff.
Thanks PY forum!

 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:28 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017