| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
09-12-2002, 12:23 AM
|
||||
|
||||
Has anyone had any experience with the fiberglass products offered at WWW.PontiacGroup.com. They offer two hoods for 60 Full Size. One pin on and one for hinges. They also offer bumpers and front clips for various Pontiacs.
__________________
 ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far..  through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
|
#2
09-12-2002, 12:23 AM
|
||||
|
||||
|
Has anyone had any experience with the fiberglass products offered at WWW.PontiacGroup.com. They offer two hoods for 60 Full Size. One pin on and one for hinges. They also offer bumpers and front clips for various Pontiacs.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
|
#3
09-12-2002, 08:48 AM
|
|||
|
|||
|
It looks like they sell VFN Fiberglass parts. Good quality. The best fiberglass parts I have seen and used. However I have never dealt with www.Pontiacgroup.com so I can't say anything about them. Hope this helps.
|
|
#4
09-12-2002, 10:24 PM
|
||||
|
||||
|
Thanks Mr421. Do you know if VFN has a web site? Would like a little more info. Wish someone made bumpers for the old 60. I could knock off 200# easy. [img]smile.gif[/img]
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
|
#5
09-13-2002, 12:30 AM
|
|||
|
|||
|
60Man- VFN web site is http://www.vfnfiberglass.com/site.htm
the site list the pin on hood as $250.00 and bolt on hood $350.00 Then add shipping. |
|
#6
09-14-2002, 02:34 AM
|
||||
|
||||
|
Thanks 68 Prix.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
|
#7
09-16-2002, 08:29 AM
|
|||
|
|||
|
You may want to contact VFN and ask if they are interested in making the bumpers. In the past they have been interested in making other parts for the "non-popular" Pontiacs. It may be a little expensive but at least you'll get good quality parts. Hopefully you have good "stock" bumpers to use for molding.
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
