[WQ59B]

From Bonne coupe, should also fit '66 without question.
Floor is very solid except right by the mounts at the rear axle. One one side I have cut that area clean & square, the other is untouched. It is still in the car, but the tail panel (above the factory seam) & both quarters are already cut away- all that remains is the cut over the axle, so you can get as much extra metal as you want.

Asking $350, let's talk about the rest. Will update with pics in the next few days. Thanks.

[WQ59B]

Finally cut this car up. Trunk pan is free, includes rear seam, and most of the 'kick up' over the rear axle. Except for the above-mentioned 2 contained areas, it is a very solid pan. Price lowered to $150

[mrrat1]

Still have the body mounts attached...pic of bottom.
I might be interested, thanks Dave

[WQ59B]

Missing pieces are still on the frame- they're nothing you can do anything with. The mount bushings, etc you are welcome to (I have the frame, too).
I'll get a pic of the bottom tomm & post.

[mrrat1]

PM sent

[WQ59B]

As requested- pics of the underside :

[mrrat1]

I think that will work for me! When can we meet up?

[WQ59B]

Still available. In the pic in post #2, I measured from the top of the spare tire latch hook (12 o'clock in that pic), to the forward edge of that bracket I cut thru in the foreground (that used to hold the trunk lock). That measurement was just over 52 inches. I believe the additional Bonneville length is in the flat of the pan. It certainly could be cut, but as is, fits the Bonneville & Star Chief.

[WQ59B]

bump