[mlund888]

Hello guys,
Do they reproduce the plastic push type clips for the harness, wiper washer reservoir hose that attaches to inner fenders?
I couldn’t save any of them
I need 5

Thank you

[76TA462]

I picked mine up at Ames. In their catalogue check under ENGINE COMPARTMENT STRAPS & WIRE RETAINERS.

[Sanduners]

The ones Ames sell don't work on the Tempests, they are too long. I've not been able to find any myself that work. I just used black zip-ties and install from under the fenders.

[beemergary]

I just made some. Cut the strap part from fuel pump diaphram material and can't remember what there called for the button heads. Used to hold papers together.

[Sanduners]

Here is what my black zip ties look like holding down the wire loom.

[John in Minnesota]

That's what I did.

[Old Goat 67]

Does anyone have pictures and/or dimensions on these?

[mlund888]

Thank you guys
Those look good as well
I will probably do the same or fill original holes and drill for the ones that are available

[Peter Serio]

Those plastic wire retainers are an unusual size. It is made like a strap and both sides have push-barrels that plug into the 2 holes. In all the swap meets I have looked I have seen none that are exact dimensions to the factory plastic.