1969 Turbo 400 Shaft Seal Replacement

[1969GiPper]

Can the seal for the gear selector shaft located in the drivers side of the turbo 400 case be replaced without dropping the trans pan? Is a special tool required?

[1969GiPper]

Anyone?

[694.1]

The TH 350 can be done with a tool, best wishes on the 400.

[stevep]

The ST-300, THM 200, 350, 400, 700 & 4L60 all use the same seal and the same removal tool.
https://www.napaonline.com/en/p/BK_7769250

[1969GiPper]

Originally Posted by stevep

The ST-300, THM 200, 350, 400, 700 & 4L60 all use the same seal and the same removal tool.
https://www.napaonline.com/en/p/BK_7769250

Thank you.