FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
1963 Harmonic balancer question
I received a 2-groove pulley from Franks and notice that the bolt holes will line up correctly in 2 different places with the harmonic balancer. Does it matter which orientation I use? 1963 389.
I apologize in advance if this is a stupid question, but it's a puzzle to me! Thanks, James Q |
#2
|
|||
|
|||
The balancer fits inside the pulley. It is not the flange on the crankshaft. That being said all 3 pieces should be able to fit together in all six different positions. The bolt holes are not offset.
|
#3
|
||||
|
||||
Thanks for the reply, I'll put it all back together and see what happens,
James Q |
Reply |
Thread Tools | |
Display Modes | |
|
|