[fbd73]

Hi All,
My auto electrician has pulled apart my dash to do some work on the electrics and I am putting it all back together. I need some advice please. There is the very thin aluminium strip that surrounds the brushed aluminium dash face but I don't know how it is held on to the wide metal strip that goes up into the dash pad. There are 6 holes in the dash insert and strip that line up with the 6 holes on the metal strip so something must go there.

I can't find any reference to it in the Classic Industries or Ames websites.

Any thoughts?

George

[3tas4me]

Originally Posted by fbd73

Hi All,
My auto electrician has pulled apart my dash to do some work on the electrics and I am putting it all back together. I need some advice please. There is the very thin aluminium strip that surrounds the brushed aluminium dash face but I don't know how it is held on to the wide metal strip that goes up into the dash pad. There are 6 holes in the dash insert and strip that line up with the 6 holes on the metal strip so something must go there.

I can't find any reference to it in the Classic Industries or Ames websites.

Any thoughts?

George

The black plate at the top of the bezel is riveted to the bezel.

[fbd73]

Excellent. thanks very much. That explains why there were no screws or similar around.