| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
06-27-2013, 10:13 AM
|
||||
|
||||
Front suspension torque values?
Car is '67 LeMans with disc brake conversion. I've done some searches and looked in my vintage chilton manuals but I can't find all the torque values for the front end.
I need the torque values for: pitman arm to steering box center link nuts torque tie rod ends upper ball joint lower ball joint steering arm to spindle bolts UCA shaft to frame nuts LCA to frame bolts
__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum. White '67 LeMans 407/TH350/Ford 3.89... RIP Red '67 LeMans. 407/TH400/Ford 3.25 |
|
#2
06-27-2013, 11:08 AM
|
|||
|
|||
|
Hope this helps. All specs in Lb.Ft.
Pitman arm to steering box: 110-140. Center link nuts: 30-40. Tie rod ends: 30-45. Upper ball joint: 55-70. Lower ball joint: 85-100. Steering arm to spindle bolts: 60-75. UCA shaft to frame nuts: 45-60. LCA to frame bolts: 75-100. Good luck. |
|
#3
06-27-2013, 10:49 PM
|
||||
|
||||
|
The lower control arm bolt torque sounds high, that bolt/nut isn't that big. The rest seem dead on. Thanks!
__________________
I could explain all this to the girl at the parts store, but she'd probably call the asylum. White '67 LeMans 407/TH350/Ford 3.89... RIP Red '67 LeMans. 407/TH400/Ford 3.25 |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
