[1967Tempest]

My NO budget build has turned into me having a 326 in my wagon.

I am looking for very cheap or trade 326 heads. I am going to be using a performer intake so they will need to be the 1965 and newer flavor.

I am trying to get this wagon on its own power to our regional show. Rings check out to be ok, but have a mismatch of heads causing very low SCR and all kinds of tune issues.

I have enough time for a head swap and retune, so I kinda need them in drop on and go condition.

Thanks
Dave

326 heads are these numbers as best I found.

22,62,094,095,140 and 141

[GTO JOHN]

Dave,

I have a pair of 094 casting heads I took off a running '66 326 several years ago. They are untouched and should be bolt on ready to run for a budget build. I know they are good because I drove the car and took the engine out and parted it myself.

I have no use for them so $25 for the pair and they are yours. Shipping is extra of course. The last pair of heads I shipped was about $87 ($43.50 per head) via UPS ground. So I can go $112 shipped to your door. I will take your personal check also.

Let me know if your interested.

Thanks John

[petesake]

PM sent

[1967Tempest]

Originally Posted by GTO JOHN

Dave,

I have a pair of 094 casting heads I took off a running '66 326 several years ago. They are untouched and should be bolt on ready to run for a budget build. I know they are good because I drove the car and took the engine out and parted it myself.

I have no use for them so $25 for the pair and they are yours. Shipping is extra of course. The last pair of heads I shipped was about $87 ($43.50 per head) via UPS ground. So I can go $112 shipped to your door. I will take your personal check also.

Let me know if your interested.

Thanks John

When do you think that I would get them. I would need them no later than Wednesday next week to get them on the car and re-tune. I can give you preprinted Fed-Ex labels. Do you take Paypal?

Thanks
Dave

[1967Tempest]

I looked at Pontiac Dude's website and it looks like the head interchangability for my 1967 326 might need 1967 heads.

Thoughts?

Thanks
Dave

[b-man]

1965 - 1967 326 heads will directly interchange onto your '67 326.

[1967Tempest]

Originally Posted by b-man

1965 - 1967 326 heads will directly interchange onto your '67 326.

SWEET!!! I will say this. Working on a budget and finding parts from guys, makes one increase his knowledge. I am flooded with small Pontiac V8 stuff!!!

Thanks B-Man!!!

[GTO JOHN]

Dave, If you want my heads I can send them recipient billing if you give me your Fed Ex or UPS account number. Let me know what service you want.

[GTO JOHN]

Pic of heads

[Joes70]

If all else fails, I have a pair of 140 heads still on a '67 engine.

Transjoeam@aol.com Joe

[1967Tempest]

I got the ones above you from John. I pressure washed them and they came out great! only issue I have now is that during shipping or whatever, there is some scratches in the fire rind area,..... sux too, cuz I really could have bolted these on. Thanks though!