FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
The Body Shop TECH General questions that don't fit in any other forum |
View Poll Results: Can vinyl graphics be clear coated | |||
Yes, wait 30 days before applying 2 more coats of clear coat | 0 | 0% | |
Yes, but you should apply in between clear coats no need to wait 30 days | 1 | 7.14% | |
No, this will eventually crack and you will have to redo the panel(s) - I have seen it happen | 2 | 14.29% | |
No, any repairs to the area may be extensive to deal with the graphic under the clear coat | 4 | 28.57% | |
Please do it so if it fails I can learn from your mistake as I was thinking about doing it | 7 | 50.00% | |
Multiple Choice Poll. Voters: 14. You may not vote on this poll |
Reply |
|
Thread Tools | Display Modes |
#21
|
||||
|
||||
Quote:
__________________
frittering and wasting the hours in an off hand way.... 1969 GTO, 455ci, 230/236 Pontiac Dude's "Butcher Special" Comp hyd roller cam with Crower HIPPO solid roller lifters, Q-jet, Edelbrock P4B-QJ, Doug's headers, ported 6X-8 (97cc) heads, TKO600, 3.73 geared Eaton Tru-Trac 8.5", hydroboost, rear disc brakes......and my greatest mechanical feat....a new heater core. |
#22
|
||||
|
||||
I have cleared over 1/4 and 3/8 vinyl tape stripes many times without any problems. In fact I painted my Road King 6 years ago and used a 1/4 inch silver metalflake vinyl stripe to seperate the two colors. I put on two heavy coats of clear to bury the stripe and then blocked them flat and then two more coats of clear. Cant feel the stripes. This was 6 years ago and no problems. The bike is kept in a garage. But your car probably is too.
|
Reply |
|
|