FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Dished Pistons?? for 455 with Ram Air Heads
Sold a set of 5C (98cc) heads. So my only spare heads now are 48s (78cc).
Spare 455+030 with 48s would be 11.1:1-11.6:1 with Flattops depending on Deck Height. QUESTiON: Are there Affordable Dished pistons 10cc-20cc for our 455s? Last time i bought dished pistons they were ROSS and spendy. |
#2
|
|||
|
|||
Check with Paul K on here for Autotec,I have bought 3 sets from him.Tom
|
#3
|
||||
|
||||
Forgot to mention: For 6.7"rods. Paul k. got it thanks.
|
#4
|
||||
|
||||
Is this a typo or did you enlarge the chambers?
#48 i´ve seen has been in the 66cc range. |
#5
|
||||
|
||||
Quote:
My question about pistons should assume key parameters: Forged, affordable, 6.8" rods ( i typed 6.7" above they are 6.8")
__________________
12.24/111.6MPH/1.76 60'/28"/3.54:1/SP-TH400/469 R96A/236-244-112LC/1050&TorkerI//3850Lbs//15MPG/89oct Sold 2003: 12.00/112MPH/1.61 60'/26"x3.31:1/10"/469 #48/245-255-110LSA/Q-Jet-Torker/3650Lbs//18MPG 94oct Sold 1994: 11.00/123MPH/1.50 60'/29.5"x4.10:1/10"/469 #48/245-255-110LSA/Dual600s-Wenzler/3250Lbs//94oct |
#6
|
||||
|
||||
If your not building a race motor and have no porting time in those 48 castings then instead off keeping them for coffee table displays then why not sell them off to fund getting a set of -8 6X or 5c or 7M5 heads to work with?
At least then you would be starting off with somewhere under 10.5 comp which I assume is what you want since you are posting in the street section!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#7
|
|||
|
|||
my 3in main 455 9.5 CR in my garage has dead stock 48 heads with dished pistons.No issue at all.Tom
|
Reply |
|
|