04-06 Interior Tech Everything that goes on inside the GTO. Dash related, Upholstery related, Console related, etc. |
|
01-05-2005, 01:14 PM
|
Junior Member
|
|
Join Date: Jan 2005
Posts: 3
|
|
Got the kit. Now I need to know how to take the console apart to install it. Anyone have some first-hand experience?
|
01-05-2005, 01:14 PM
|
Junior Member
|
|
Join Date: Jan 2005
Posts: 3
|
|
Got the kit. Now I need to know how to take the console apart to install it. Anyone have some first-hand experience?
|
01-05-2005, 03:07 PM
|
|
Ultimate Warrior
|
|
Join Date: Jan 2002
Location: Naples, FL
Posts: 1,500
|
|
First, welcome to the forum!
Second, you need to remove a screw that is under the compartment (under the radio).
After that, open the consol lid, and start pulling up carefully along the sides of the console, starting at the rear of it and working your way forward. The top comes off independantly of the sides. If you have the stock shift handle (I don't) you might have to pull the shift boot up in order to get enough room to (pull up along the edges. it is attached to the stick).
The console will lift up and out of the way.
I am not sure if you need to remove the radio to install the smokers kit. If so, take 4 small phillips head screwdrivers, and push them in the holes. apply outward (towards the doors)pressure on all 4 and start wiggling. It takes a bit of messing with to get it out, but it will eventually come out. The lower left side of the radio is where the plugs are, and you hav to overcome a lot of friction, with not too much leverage.
They also sell a tool for the job, but I replaced my head unit, and only needed to remove it once.
__________________
'66 GTO convertible. 462, KRE 290 cfm Dports, SD "Old Faithful" hydraulic roller, CVM ported aluminum Tripower, TKO600, Moser 12 bolt
"I open up three deuces, I'm Never Coming Back!"
|
01-06-2005, 08:56 PM
|
|
Senior Chief
|
|
Join Date: Jul 2004
Location: Salisbury, MD
Posts: 482
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Old-GTO:
Got the kit. Now I need to know how to take the console apart to install it. Anyone have some first-hand experience? <HR></BLOCKQUOTE>
Why not just stop smoking??
__________________
Randy W 1975 Firebird third owner. 1980 Grand Am/black/beaurdeaux/45000 mile original owner.(Now belongs to Iowapub.) '67 Impala SS (sold)
|
01-07-2005, 10:24 PM
|
Junior Member
|
|
Join Date: Jan 2005
Posts: 3
|
|
Randy W, You must work for Microsoft. Whenever I ask them questions, I get the same kind of responses....useless to me, but they think they're providing me with great wisdom.
|
01-07-2005, 10:31 PM
|
Junior Member
|
|
Join Date: Nov 2004
Location: stockton, calif
Posts: 3
|
|
Don`t smoke in the car.
|
01-08-2005, 08:16 AM
|
|
Senior Chief
|
|
Join Date: Jul 2004
Location: Salisbury, MD
Posts: 482
|
|
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Old-GTO:
Randy W, You must work for Microsoft. Whenever I ask them questions, I get the same kind of responses....useless to me, but they think they're providing me with great wisdom. <HR></BLOCKQUOTE>
Actually, I was just kidding!
__________________
Randy W 1975 Firebird third owner. 1980 Grand Am/black/beaurdeaux/45000 mile original owner.(Now belongs to Iowapub.) '67 Impala SS (sold)
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 07:23 PM.
|
|