[unruhjonny]

Originally Posted by Dens71TA

I remember Big A Auto Parts. They went out of business in the late 90's. At best it's about 25 years old.

thank you VERY much for this!!

My guess was purely based on the two part numbers (an apparent mismatch between the part and the box).

[RAJ7395]

I've got a couple NOS and three used 40838 pumps on the shelf.

Sounds like the general consensus is that these should be rebuilt with new internals that are ethanol compliant before use? Correct?

[hiyabradHO]

Originally Posted by RAJ7395

I've got a couple NOS and three used 40838 pumps on the shelf.

Sounds like the general consensus is that these should be rebuilt with new internals that are ethanol compliant before use? Correct?

Who has the correct equipment to open and reseal the cans?

[1971455HO]

Originally Posted by starlightblack

crimped fuel pump rebuilds:

Fred Ballard
28916 Flowerpark Drive
Canyon Country, Ca. 91387-1801
661-251-2362

This post started back a while. You are wondering who rebuilds crimped style fuel pumps.... starlightblack posted this back in 2019. it on the 2nd page of this topic.

It's old info, but he may still do the work??? Don't know. hope this helps.

[455hota]

I am trying to get my hands on one or two Spectra SP1304MP fuel pumps. I have read all the posts and that one seems the best match for a 70 TA RAIII.

However, right now, everywhere on the internet, all the sellers and retailers do not seem to have this fuel pump in stock! Could it be Covid has struck the fuel pump supply chain as well???

Does anyone have a lead on some SP1304MP's?? Or I would be interested in a good used one and I could spend the $$$ and get it rebuilt, as stated in some of the other posts.

Thanks in advance for any help...

[unruhjonny]

I have seen it pop up from time over the last year when I looked;
Just not on Rockauto for a long time.

The best I can suggest is looking for stuff like this on eBay:

https://www.ebay.ca/itm/402770036653...quBSnChA%3D%3D

[Tellyshavilli]

Originally Posted by 455hota

I am trying to get my hands on one or two Spectra SP1304MP fuel pumps. I have read all the posts and that one seems the best match for a 70 TA RAIII.

However, right now, everywhere on the internet, all the sellers and retailers do not seem to have this fuel pump in stock! Could it be Covid has struck the fuel pump supply chain as well???

Does anyone have a lead on some SP1304MP's?? Or I would be interested in a good used one and I could spend the $$$ and get it rebuilt, as stated in some of the other posts.

Thanks in advance for any help...

Hi Steve can you give me a call tomorrow I should be able to help you

[TA-71]

Reviving this post, what is the current go to part number for a 70 RA3 fuel pump?

[Ramairnacho]

Originally Posted by 455hota

I am trying to get my hands on one or two Spectra SP1304MP fuel pumps. I have read all the posts and that one seems the best match for a 70 TA RAIII.

However, right now, everywhere on the internet, all the sellers and retailers do not seem to have this fuel pump in stock! Could it be Covid has struck the fuel pump supply chain as well???

Does anyone have a lead on some SP1304MP's?? Or I would be interested in a good used one and I could spend the $$$ and get it rebuilt, as stated in some of the other posts.

Thanks in advance for any help...

I found an original and had Fred restore it. Basically followed my friend John. I also got a repop 1972 version they are tall can and will work fine but the inlet lines are slightly different. I haven't seen an exact match and would like to see one and buy one. But not sure if they make it any more.

[Tellyshavilli]

Anybody buy any of these fuel pumps lately for 70 to 71 Firebird?
SP1304 MP ?

[hiyabradHO]

Originally Posted by Tellyshavilli

Anybody buy any of these fuel pumps lately for 70 to 71 Firebird?
SP1304 MP ?

I have some in storage from the original run.

[Tellyshavilli]

Originally Posted by hiyabradHO

I have some in storage from the original run.

Let me know if they’re extra if you want to sell them

[unruhjonny]

If they do another run, I'll be sure to buy one...

[MDSHARK81]

I hope they do another run

[Norwood]

I’m currently using a small can pump from a 69 GTO due to lack of trust for the correct pumps I have. The rubber inlet and return line up with this pump, I’m using the steel from pump to carb from the GTO. So I too hope for another run of these by Spectra. I’m not so much worried about correct in this case since I drive it, I favor function at this point

[hiyabradHO]

Originally Posted by Tellyshavilli

Let me know if they’re extra if you want to sell them

I will get to storage in the next few weeks and I’ll let you know what I have.

[3tas4me]

Originally Posted by hiyabradHO

I will get to storage in the next few weeks and I’ll let you know what I have.

I could use one as well for my '70 project.

[wwilder9]

I need a few also