| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#61
10-22-2003, 06:26 AM
|
||||
|
||||
Nice pipes! I've been considering 3" mufflers and tail pipes for my '76. Not sure about ground clearance with the large mufflers though.
Pittsburgh, Jim and Tom Hand have done some extensive exhaust system testing. Not only have they tested mufflers but they also tested crossovers. Check http://www.boyleworks.com/ta400/psp/exhaust.html for the complete run down. The X is unlike a Y in that the X branches back out into two separate pipes where the Y necks into a single pipe. |
|
#62
10-22-2003, 07:48 AM
|
||||
|
||||
|
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Rocky Rotella:
I've been considering 3" mufflers and tail pipes for my '76. Not sure about ground clearance with the large mufflers though. <HR></BLOCKQUOTE> Rocky, I saw several 2nd gen TA's at Norwalk with 3" exhaust and no clearance issues. It's not so much the mufflers as it is the pipes traveling under the floor boards. I did notice that both cars I remember had very good suspensions. Their cars probably sat and inch or 2 higher than stock. --------------------------- Fool around, Get hurt, don't come crying to me.
__________________
--------------------------- Fool Around, Get Hurt, Don't come Crying to me. |
|
#63
10-22-2003, 08:11 AM
|
||||
|
||||
|
.................
1973 SD455 T/A 1979 S.E. T/A http://community.webshots.com/album/16587603rOyvmFCiHs [This message was edited by Larry Navarro on October 22, 2003 at 11:47 AM.]
__________________
Home of WFO Hyperformance Shaker induction. |
|
#64
10-22-2003, 08:53 AM
|
||||
|
||||
|
Just to let the members know.
Yesterday the 2 1/2 chrome Tips arrived! they were packaged very well! Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway! 
__________________
Try calling CRUSHPROOF! 512-386-9889 |
|
#65
10-22-2003, 08:56 AM
|
||||
|
||||
|
Here is a view of them.
Nice! Well done! Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!
__________________
Try calling CRUSHPROOF! 512-386-9889 |
|
#66
10-22-2003, 09:00 AM
|
||||
|
||||
|
Here is the test fitting!
They look even better on the car! Well done! Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!
__________________
Try calling CRUSHPROOF! 512-386-9889 |
|
#67
10-22-2003, 09:15 AM
|
||||
|
||||
|
Which tips should I get to be correct for a 67 2-1/2"?
__________________
1965 GTO Convertible, Blue Mist Slate. 1967 GTO Hard Top Coupe, Champagne Gold 2005 G6 Sedan, Electric Blue |
|
#68
10-22-2003, 09:29 AM
|
||||
|
||||
|
If you order the Pypes 2 1/2 kit then the ones I have are the ones you use.
If you have stock exhaust the tips are smaller Check out the Removed exhaust pix I posted. Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway!
__________________
Try calling CRUSHPROOF! 512-386-9889 |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
