[justintiime]

Outside of tailgate is done


Here is the paint!

[justintiime]

spare tire well all repaired

[justintiime]

having a hard time finding window run channels, so he measured the ones from the car and I'm trying to match it up the best I can




Tested the tail gate switch to figure out why the window wont go up or down with the key. switch is fine.


He painted the interior metal (on the sides of the 3rd seat).

Before


During



After


I think I am going to have that vinyl removed, and replaced with carpet.

[pfilean]

having a hard time finding window run channels, so he measured the ones from the car and I'm trying to match it up the best I can

Have you tried Steele Rubber? www.steelerubber.com

[justintiime]

Yeah I actually went there, toured their plant, and bought every piece they had for my wagon For such a large appearance they have, they are actually much smaller than anticipated.

I purchased some universal channel that should work ok.

[goatwgn]

Not the same style wagon (mine is a '66 Tempest Custom), but I removed the vinyl years ago and installed carpet. Do it to yours, you will like it.

[justintiime]

Brightwork on the tailgate being restored



Inside of tailgate blasted and painted


jambs being cut in




The green is real dark when not in direct sun. Not 100% sure I want to keep it.

[justintiime]

Couple small holes in the roof being repaired


guide coat


primer


on to the doors!

[justintiime]

made a new gasket for the tailgate handle


doors are off


passenger rear window wont roll up or down
http://vid60.photobucket.com/albums/...pspds2gisu.mp4

Heres why...window came unbonded. Looks like someone did a **** job replacing this glass years ago. There is still glas in the door.....and a postcard from iowa lol





reusable vapor barrier


looks like the trim can come off easily. I will be leaving it off.

[misterp266]

No stainless trim on the doors...!!! I like it!

Where did you get the heater delete plate? I had one custom made and now they are marketing them....

Rob

[justintiime]

Heater delete plate was found on ebay for like $65

prepping the NOS door I found

[justintiime]

Look ma, no doors!






polishing!

[justintiime]

[justintiime]

I love the contrast of the tan against the green. This car is going to look great




that metal flake,,,,

[Jeff Hamlin]

Can't wait to see her in all her glory again.
Love the Green.

reminds me of the CC build...

[Alf ista]

Looking really nice so far!

[lemansboy70]

Man, that is SWEEEET!!! Great color combo.

[cruzingratiot]

[QUOTE=justintiime;5548265]having a hard time finding window run channels, so he measured the ones from the car and I'm trying to match it up the best I can




look here through all the pages

http://stores.restorationspecialties...indow-channel/

[justintiime]

thanks for the heads up. The universal channel that I found worked great on the rear window, and the rest of the windows were fine.

FINALLY found the correct under dash tach for a 1964 and this thing is mint


One door done


bottom window channel all bent to hell


all fixed


nasty


All cleaned and lubed up


Doors have been reconditioned, and hung, and cut in. time to flip the car around and start all over

[justintiime]

vent window trim is beat up, need to find another



drivers side is under the knife


doors are a little crusty