#1  
Old 05-10-2024, 11:55 AM
drain89 drain89 is offline
Junior Member
 
Join Date: Nov 2021
Location: Chesapeake OH (Home) Southwest VA (Work)
Posts: 21
Default WTB ‘63 bolt on AC crank pulley and “8AC” PS pulley

PS pulley is cast with 8AC cast onto the spokes
Crank is stamped steel or aluminum. Pic of crank pulley:
Attached Thumbnails
Click image for larger version

Name:	IMG_6216.jpeg
Views:	7
Size:	57.4 KB
ID:	633501  
Attached Images
  

  #2  
Old 05-10-2024, 06:24 PM
694.1 694.1 is offline
Ultimate Warrior
 
Join Date: Jul 2010
Location: SE WI
Posts: 1,376
Default

Not sure if this is aftermarket but bolts to the stock pulley.
Would this work?
Attached Thumbnails
Click image for larger version

Name:	P1015008.jpg
Views:	13
Size:	73.9 KB
ID:	633520  

__________________
"At no time did we exceed 175 mph.”
Dan Gurney's truthful response to his and Brock Yate's winning of the first ever Cannonball Baker Sea-to-Shining Sea...

Still have my 1st Firebird
7th Firebird
57 Starchief
  #3  
Old 05-10-2024, 09:23 PM
drain89 drain89 is offline
Junior Member
 
Join Date: Nov 2021
Location: Chesapeake OH (Home) Southwest VA (Work)
Posts: 21
Default

Wat are the dimensions of it?

  #4  
Old 05-10-2024, 11:28 PM
T.Weber's Avatar
T.Weber T.Weber is offline
Senior Chief
 
Join Date: Mar 2002
Location: California
Posts: 434
Default

The deminsions of my pulley where it would sit attached to the haronic balancer are 1 9/16" to the inside grove where the belt would ride - 2 1/4" to the out side of where the belt would ride inside that grove - if that makes any since and the OD of the pulley is 6 1/16". If you wnat pics with a tape against th epulley let me know.

  #5  
Old 05-10-2024, 11:36 PM
T.Weber's Avatar
T.Weber T.Weber is offline
Senior Chief
 
Join Date: Mar 2002
Location: California
Posts: 434
Default

This is the bracket you need for the alternator to use a 61 - 63 A/C compressor mount:

https://www.ebay.com/itm/266355695031

As I stated earlier Franks Pontiac has the flat plate that bolts to this Alternator mount.

  #6  
Old 05-11-2024, 05:12 AM
drain89 drain89 is offline
Junior Member
 
Join Date: Nov 2021
Location: Chesapeake OH (Home) Southwest VA (Work)
Posts: 21
Default

Quote:
Originally Posted by T.Weber View Post
This is the bracket you need for the alternator to use a 61 - 63 A/C compressor mount:

https://www.ebay.com/itm/266355695031

As I stated earlier Franks Pontiac has the flat plate that bolts to this Alternator mount.
I have that bracket and the mounts. I also have the water pump pulley, 2 groove balancer pulley , and the power steering pump mounting bracket.
The only missing piece of the puzzle is the bolt on single groove pulley and correct PS pump pulley..

  #7  
Old 05-11-2024, 11:58 AM
drain89 drain89 is offline
Junior Member
 
Join Date: Nov 2021
Location: Chesapeake OH (Home) Southwest VA (Work)
Posts: 21
Default

Quote:
Originally Posted by 694.1 View Post
Not sure if this is aftermarket but bolts to the stock pulley.
Would this work?
694.1 What is the dimensions of mounting surface to bottom edge of groove and top edge of groove? Bottom diameter at mounting surface and top diameter? Thanks

  #8  
Old 05-13-2024, 09:13 PM
T.Weber's Avatar
T.Weber T.Weber is offline
Senior Chief
 
Join Date: Mar 2002
Location: California
Posts: 434
Default

Check out this guy Larry Groskopf, He's on face book and has the pulleys & Compressor with mounts for sale. He wants $90.00 for the pulleys & harmonic balancer

https://www.facebook.com/groups/2613...0002279058078/

  #9  
Old 05-14-2024, 01:31 AM
drain89 drain89 is offline
Junior Member
 
Join Date: Nov 2021
Location: Chesapeake OH (Home) Southwest VA (Work)
Posts: 21
Default

Quote:
Originally Posted by T.Weber View Post
Check out this guy Larry Groskopf, He's on face book and has the pulleys & Compressor with mounts for sale. He wants $90.00 for the pulleys & harmonic balancer

https://www.facebook.com/groups/2613...0002279058078/
Thanks pal, I sent him a message.

  #10  
Old 05-16-2024, 11:14 AM
omarsphatt omarsphatt is offline
Member
 
Join Date: Mar 2007
Location: NorCal
Posts: 45
Default

If you end up with any spare A/C pulleys you want to sell, let me know - I'm looking for the same. Do any of the ones you have, have part numbers on them?

  #11  
Old 05-16-2024, 03:18 PM
drain89 drain89 is offline
Junior Member
 
Join Date: Nov 2021
Location: Chesapeake OH (Home) Southwest VA (Work)
Posts: 21
Default

Quote:
Originally Posted by omarsphatt View Post
If you end up with any spare A/C pulleys you want to sell, let me know - I'm looking for the same. Do any of the ones you have, have part numbers on them?
I certainly will. These things are like trying to find hens teeth.

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:33 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017