[simsb52]

I have 3 standard length and 1 .010 length timing sets ready to go.
Thanks...Scott

[simsb52]

I have 2 standard length and 1 .010 length timing sets ready to go.
Thanks...Scott

[aronhk_md]

Scott,

I dont remember without looking back through 15 pages......can your setup be used with a pete jackson gear drive?

Thanks,
Aron

[simsb52]

to be honest.....no! the gear drive has to be modified. is it a single idler?

thanks....scott

[racegto65]

Originally Posted by simsb52

to be honest.....no! the gear drive has to be modified. is it a single idler?

thanks....scott

Scott,you modified 2 Pete Jacksons for me and they work flawlessly.Thanks again.

[aronhk_md]

Its the quiet version and I didnt install it....hmmm....Mark should know

[marks73ta]

It's a replica/knock off of the Pete Jackson 2 idler drive. Big cam gear. Small crank gear and 2 idlers held in place with a cross bar. It was the standard size. Mark L

[aronhk_md]

Thanks Mark.....is this workable Scott?

[simsb52]

should be. If you want to, send the cam gear to me, and I'll make the mod and set it up for the roller retaining plate. Cost is $200. Its alittle more cause the cam gear is really frickin hard and its no fun to machine.

Thanks...Scott

[aronhk_md]

ok Scott, I hope to have it apart in a couple of weeks. I'll touch base with you then.

Thanks,
Aron

[simsb52]

I have 2 standard length and 1 .010 length timing sets ready to go.
Thanks...Scott

[simsb52]

I have 1 standard length and 1 .010 length timing sets ready to go.
Thanks...Scott

[marks73ta]

Scott, still waiting for Paul down in Tucson to tell me what he had to cut the lower end for to fit the main caps. Will call you once I know. I'm still hangin' in there. Mark L

[simsb52]

I have 1 standard length and 1 .010 length timing sets ready to go.
Thanks...Scott

[70judgeconv]

Do you have any of these setups avail.?

[simsb52]

I will have a couple of standard length sets ready in jan 2011. What length did you need?

I have a .010 length set ready.

Thanks...Scott

[simsb52]

I will have a couple of standard length sets ready in jan 2011.

I have a .010 length set ready.

Thanks...Scott

[ITSBACK]

How about some pictures of whats included in the package? Sounds interesting as I need a cam thrust plate and a timing chain as well as a lot of other things for my build.

[ITSBACK]

I came into this thread in the first page not knowing there were 15 pages when I sked for pics so I appoligize if they are posted already. If they are, what page?

[simsb52]

here are some pictures