FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
68 convo top ram question
Noticed drivers side hydraulic ram walking side to side (bumping the side panel) when putting top up/down. Found the culprit was galled threads on the “pivot” bolt pictured. I have a new one to put in but want to chase threads in mounting hole. My tap & die sets go to 1/2”. Near as I can tell looks like maybe 5/8-18? I’ll have to buy a single tap (local HD and hardware stores didn’t have that side nor a nut to at least check the thread size) and I might need to order one online. Hoping someone can confirm tap I need to buy.
Thanks
__________________
1968 LeMans conv. 350 HO - 4 speed triple white (hear it idle here) https://www.youtube.com/watch?v=eVmq...ature=youtu.be 1968 LeMans conv. 350 - 4 speed Solar red/pearl |
#2
|
||||
|
||||
It’s 5/8-18.
__________________
1968 LeMans conv. 350 HO - 4 speed triple white (hear it idle here) https://www.youtube.com/watch?v=eVmq...ature=youtu.be 1968 LeMans conv. 350 - 4 speed Solar red/pearl |
Reply |
|
|