FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Industry Stuff new repro's, updates, other info. |
View Poll Results: Poll question | |||
Yes. I would definitely buy. | 41 | 50.62% | |
Yes. I would buy one if I could find the carbs | 34 | 41.98% | |
No. Too expensive even though I have the carbs. | 6 | 7.41% | |
Voters: 81. You may not vote on this poll |
Reply |
|
Thread Tools | Display Modes |
#61
|
|||
|
|||
I received pictures of all the molds in the mail today. I should have a finished test product in 4 weeks. After I check the fit and alignment I will give the ok to produce them. Looks like the end of March. I am also coming out with the 66 waterneck in aluminum. Should be out at the same time. Also getting a quote on end carb pieces. I'm hoping to make new bases and tops and eventually the bowls. I would like to see these parts out by the end of May. Will keep you informed.
|
#62
|
|||
|
|||
I would be interested if I could get the carbs. I have a 62 manifold I would love to use if I could also get the carbs.
|
#63
|
|||
|
|||
carbs are avail. all the time,they are just very expensive.Around $150 each for good rebuildable cores.You have to be careful of WHAT you are buying.Tom
|
#64
|
|||
|
|||
The idea of this aluminum tripower is great. However, what about a kit of some kind...one that has a complete mechanical linkage, the manifold, waterneck...maybe even have another kit for the carbs that includes the bases, tops, and all?? What do you think Ccass if your still checking this out??
A$$, cash, or grass--you don't ride for free
__________________
A$$, cash, or grass--you don't ride for free |
#65
|
||||
|
||||
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by Golden69:
The idea of this aluminum tripower is great. However, what about a kit of some kind...one that has a complete mechanical linkage, the manifold, waterneck...maybe even have another kit for the carbs that includes the bases, tops, and all?? What do you think Ccass if your still checking this out?? <HR></BLOCKQUOTE> IF the carbs were to become available, we would definitely put together a complete kit. --------------------------- Fool around, Get hurt, don't come crying to me.
__________________
--------------------------- Fool Around, Get Hurt, Don't come Crying to me. |
#66
|
||||
|
||||
progress! pictures!
[This message was edited by Ccass on February 11, 2003 at 01:04 PM.]
__________________
--------------------------- Fool Around, Get Hurt, Don't come Crying to me. |
#67
|
||||
|
||||
I'm pretty impressed with the tripower intake.
Looks like it will be a real good seller. |
#68
|
||||
|
||||
I agree, a MUCH NICER finish than I expected.
Looking forward to flowing one and providing the info to everyone. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#69
|
||||
|
||||
It's looking good, can't wait to get mine, got the carbs ready to install on this aluminum intake.
Robert Williams
__________________
"Three may keep a secret, if two are dead" ~ Benjamin Franklin ~ |
#70
|
||||
|
||||
Agreed. Very nice finish and looks good. I am looking for center carb now. I have one some where if I can just find it. For my application it need not be a correct 66 tri-power carb. Just let me know when they are ready.
Outlaw Pontiac Racers Association"For Those Who Live The Legend" Do it now fool! Life is short.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#71
|
||||
|
||||
Looking good Chris! Any idea on projected MSRP?(not that it matters )
http://kurtspontiac.homestead.com/TimSimpson66GTO.html |
#72
|
||||
|
||||
$450 is looking like the price at this point. Maybe $425. We should know for sure by the end of March. I expect to have at least several at the Spring shows. That will at least save on shipping. You might want to get your requests processed now. PY Part #RPE342. Assume $450. We won't bill your credit cards until they are in stock.
--------------------------- Fool around, Get hurt, don't come crying to me.
__________________
--------------------------- Fool Around, Get Hurt, Don't come Crying to me. |
#73
|
||||
|
||||
I just hope it doesn't come out of the same Foundry that the Wenzler stuff does.
Build it fast, build it right, build a Pontiac. http://PontiacDude.cc |
#74
|
||||
|
||||
It does not look like any Wenzler parts, Hell Edelbrock has not been doing too good on the quality control as of the last 3 years.
Robert Williams
__________________
"Three may keep a secret, if two are dead" ~ Benjamin Franklin ~ |
#75
|
||||
|
||||
Just a suggestion. It would be nice to have BOTH bosses on the water cross over tapped for heat gauge and /or fan switch or even to allow for cooling system mod.( rear of cylinder head to crossover) In addition to tap two rear bosses for spark plug wire looms. It looks like a first class piece and maybe this has already been thought of, but just my .02 worth. Any more reports on flows or delivery date.
Impaient as usual. Outlaw Pontiac Racers Association"For Those Who Live The Legend" Do it now fool! Life is short.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#76
|
||||
|
||||
Any news?
75bird 7.41 1/8mile at 92mph street car 73Ventura 11.88 at 113 streetcar 69GrandPrix 12.64 at 107 tow car 65GTO 10.14 at 129 tri-power dragcar |
#77
|
||||
|
||||
Chris is sending me one of the first ones to flow
and to mock up a tri-power on. I will also trial fit it on a couple of engines. I will post the info as soon as my eval work is completed. No he is not GIVING me the intake! Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#78
|
|||
|
|||
I want 2....gimme, gimme, gimme!
__________________
NOOOOO! it's not a freakin' Chevelle! |
#79
|
||||
|
||||
So far just a consolation prize. The aluminum waternecks(65') just arrived. They look real nice! No word on the intake yet.
--------------------------- Fool around, Get hurt, don't come crying to me.
__________________
--------------------------- Fool Around, Get Hurt, Don't come Crying to me. |
#80
|
||||
|
||||
I'll take one of them too.!
Outlaw Pontiac Racers Association"For Those Who Live The Legend" Do it now fool! Life is short.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
Reply |
|
|