| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
01-16-2020, 12:21 PM
|
||||
|
||||
Passenger side speedo cable for Muncie
Hi Gang........I'm considering replacing my existing M21 with an Autogear Muncie, but they only have passenger side speedo.
What's involved in routing a longer cable on a '67 GTO? George
__________________
"...out to my ol'55, I pulled away slowly, feeling so holy, god knows i was feeling alive"....written by Tom Wait from the Eagles' Live From The Forum |
|
#2
01-16-2020, 12:49 PM
|
||||
|
||||
|
I used a cable for a 65 Chevelle with an auto (pretty sure its 80-83" long) and was able to run it over the top of the bellhousing and down that way on my 65 LeMans, but more than one way to skin a cat.
__________________
65 LeMANS , SD performance 462ci Engine, Tremec TKX 5 speed with a 3.73 geared 8.5" 10 bolt |
|
#3
01-16-2020, 02:05 PM
|
||||
|
||||
|
Any tight bends in the process?
George
__________________
"...out to my ol'55, I pulled away slowly, feeling so holy, god knows i was feeling alive"....written by Tom Wait from the Eagles' Live From The Forum |
|
#4
01-16-2020, 02:16 PM
|
||||
|
||||
|
Quote:
No lots of cable so easy to work with just doesn’t look stock if that’s an issue. Sent from my iPhone using Tapatalk
__________________
65 LeMANS , SD performance 462ci Engine, Tremec TKX 5 speed with a 3.73 geared 8.5" 10 bolt |
|
#5
01-16-2020, 03:08 PM
|
|||
|
|||
|
The silver car (79) had an extension on the main cable. It crossed over under the bellhousing and was held up by a clamp under an inspection plate bolt.
The main cable by itself is long enough for drivers side speedo. Clay |
|
#6
01-16-2020, 05:04 PM
|
||||
|
||||
|
Won't the tail housing of your M21 fit the Autogear trans?
|
|
#7
01-16-2020, 05:07 PM
|
|||
|
|||
|
I just ran mine under the trans. It was tight.
|
|
#8
01-16-2020, 07:55 PM
|
|||
|
|||
|
I installed the Autogear M22W in my 67 and just added a speedometer cable extension. Ran it up and over the front of the tranny. Easy and works perfectly. Here's a picture and a link to the one I bought.
https://www.ebay.com/itm/SPEEDOMETER...72.m2749.l2649 |
|
#9
01-17-2020, 02:16 AM
|
||||
|
||||
|
Never thought of swapping the tail housing...that's a good idea. The trans would be new tho........I guess if i was going to work on the existing one, I might as well rebuild it myself for half the price.....
The extended cable seems like a decent compromise, I just don't like it. I'd like an OD, of course but don't want to mess with the tunnel. I've been reading the OD threads too, no simple choice there either. George
__________________
"...out to my ol'55, I pulled away slowly, feeling so holy, god knows i was feeling alive"....written by Tom Wait from the Eagles' Live From The Forum |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
