#1  
Old 06-18-2024, 01:01 PM
Dhanse67 Dhanse67 is offline
Junior Member
 
Join Date: Jun 2024
Posts: 2
Default 1957 Pontiac 347 Camshaft selection

Sorry wasn't sure which forum was the best for this question so I have posted in two of the forums now.



My Father-in-Law and I are rebuilding his 347 and are planning the upgrade to the sbc summit roller tip rockers. My question is in regards to the camshaft. We had the summit K2800 picked out but then read about confirming that the #2 and #4 journals are cross drilled for the rocker arm stud oiling and apparently it is not. We are wondering if since we will be oiling through the pushrods to the rocker arms if it will matter if we use this camshaft? I'm assuming that oil will just not be fed to the rocker arm studs. Thanks in advance for your feedback

  #2  
Old 06-18-2024, 04:03 PM
tom s tom s is online now
Ultimate Warrior
 
Join Date: Jan 2000
Location: long beach ca usa
Posts: 18,910
Default

I have changed over to push rod oiling and never did anything else to the engine.Just make sure the rockers have the oiling hole.Tom

  #3  
Old 06-18-2024, 07:13 PM
Bill Hanlon's Avatar
Bill Hanlon Bill Hanlon is offline
Ultimate Warrior
 
Join Date: Feb 2005
Location: Fredericksburg, TX
Posts: 2,379
Default

The drilling on #2 and #4 cam journals are only necessary if you are using the original stud oiling. Like Tom said.

__________________
My Pontiac is a '57 GMC with its original 347" Pontiac V8 and dual-range Hydra-Matic.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:15 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017