[indymanjoe]

Free Never installed,Ames Pn L175L 70-72 splash shields with clips pair.pay shipping or pick up.

[lrust]

Free Failed convertible top pump from 67 GTO. I assume this is a rebuildable core. Pay shipping from 29642.....or goes in trash next week.

[lrust]

Free TH400 that I got with a motor. I don't know the history nor have I used it. I assume it is a rebuild-able core. Need to get it out of my garage and to someone that can use it. BOP bolt pattern. Free to first person that can pick it up - not interested in shipping.

[TimeWarp]

Pair of 66 heads that need refurbishing...must pick up in west chester, PA

[TimeWarp]

nobody wants these?

[form74]

Cragar Center Caps, Started to clean one up mostly surface Rust.

Pickup or Pay for the Ride.

Were on the Car Trailer I bought last Fall.

Much Easier to Grease the Trailer without them

[jeff chmura]

'65 A body sunvisors fabric shot. board and mounting in decent shape. Pay the shipping and there yours... Jeff

[jeff chmura]

'67 on stock valve covers. I think these are around mid 70's
pay the shipping.....

[form74]

Originally Posted by form74

Cragar Center Caps, Started to clean one up mostly surface Rust.

Pickup or Pay for the Ride.

Were on the Car Trailer I bought last Fall.

Much Easier to Grease the Trailer without them

GONE

Thanks PY

[lrust]

plastic handle broken as shown. otherwise functional. free to a good home with covered shipping from 29642.

[indymanjoe]

Ames pn# p165bl inner fender splash shields.1970-1972 New never installed.pay the shipping they are yours.PM plz i may not see the reply here.

[indymanjoe]

Pics


Sent from my iPhone using Tapatalk

[indymanjoe]

LOL forgot i put them here....awhile ago. cant find the clips though.

[indymanjoe]

Trunk latch asm works as it should pay shipping pm me plz
Off a 72 lemans





Sent from my iPhone using Tapatalk

[indymanjoe]

Originally Posted by lrust

Free TH400 that I got with a motor. I don't know the history nor have I used it. I assume it is a rebuild-able core. Need to get it out of my garage and to someone that can use it. BOP bolt pattern. Free to first person that can pick it up - not interested in shipping.

If ya cant get rid of it save the governor,speedo gear tail housing etc..i couldn't give one away and the governor came in handy..

[lrust]

4 Used Ross Pistons for 455. Job numbers are 51320 and 39940. Ross gave me the following on the 51320: 4.181 bore and .980 pin size, stock stroke and rod length application. 39940 appear similar but I have no specs. Pls cover shipping from 29642, otherwise free....

[form74]

One Cooper Discovery HT Tire LT265/70R17

Approximately 3 years old

Lots of tread left

This came off my F150 which is gone.

Just taking up room in my garage , want it gone

Pickup only

See attached post for pictures http://forums.maxperformanceinc.com/...d.php?t=815464

[Dragracertoo]

Have 2 , 400 bare blocks. 1975 #500557 and 1976 #500557.

Looking for 650 Holley 4bbl. Grayslake IL. gtoracecar@Yahoo.com Thanks, Rich

[unclescratch]

Have a 6210 and 6498. Can send photos if interested. Also a 6910 800 cfm w/center hung floats.

[Half-Inch Stud]

Free but ya gotta come get it;

Small box of Rear Axle internals:10-12 bolt, 8.5, some Dana60, bolts bearings, spiders pins.
Milk crate of Starters, mostly PMD.

Bucket of nice drum brake hardware:10-12 bolt, Some Dana-60, maybe some G-body. All nice. I got no drum brake cars.

Small Bucket of 68-70 door window hardware; extras from the years.

Power Steering box from a 70 GTO.
Wiper Motor; decent core at the least.
1970 TH400 Converter shield: clean, straight.

Bolts: got more than i need so a thinning is good.
Q-JET internals need thinned.
TH400 internals need thinned.
Some Pontiac Wiring Harnesses gotta go.
70 GTO Lowerdash AC thingy for AC Cars..nice black but has drill holes for audio/gauges that ya cant see when installed.

Bring me a console stereo or something.