FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#41
|
|||
|
|||
here u go
|
#42
|
|||
|
|||
very difficult to see any detail of the ports on the base plate & the pics are sideways... can you get a pic showing the ports on the front of the base plate like whats in the link i posted of a 1980 turbo carb?
or can you look at the pics on the link & confirm you have the correct ports for the pevr? need to verify that since there is no # stamped on the carb. http://www.v8online.co.za/TransAm-301-Turbo/ Last edited by 78w72; 02-18-2020 at 12:45 PM. |
#43
|
|||
|
|||
Quote:
|
#44
|
|||
|
|||
ok good. if you are sure they are all there & in the right locations, then hopefully its the correct carb. now all you need is to find a PEVR valve.
then you can confirm the vac lines are right & maybe do a basic vac test & confirm the choke has 12v power & operates correctly. after that you can check the turbo & see what psi its making. |
#45
|
|||
|
|||
Quote:
|
#46
|
|||
|
|||
send him the carb to verify internal parts are correct & do a rebuild. ive read these reman'd carbs can use incorrect parts like jets & secondary rods etc.
|
#47
|
|||
|
|||
will do
|
Reply |
Thread Tools | |
Display Modes | |
|
|