| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
06-18-2014, 09:14 PM
|
||||
|
||||
Dome aircleaner lid
Guys I'm looking for a Dome lid like this pic from Parts place
Its for the 70-76 Trans am Shaker set up... Does anyone have dimensions on one of these lids...Thanks Chris
__________________
 1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's
|
|
#2
06-19-2014, 08:27 PM
|
|||
|
|||
|
I have an original from a 76 T/A. It measure's 14 1/4" .
|
|
#3
06-19-2014, 08:53 PM
|
||||
|
||||
|
Quote:
Is it at all possible to get the dimensions of the dome that is the part i really need to know...... I need to know the dome height and the diameter if possible...I want to cut one up if its the right size dome I have seen them on Ebay and other vendors thanks for any help..Chris
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's
|
|
#4
06-19-2014, 11:01 PM
|
||||
|
||||
|
The '70-5 TA lid, as well as the '77-9 Olds 403 engine TA lid is approx. 13-1/4" wide (AC air filter A366C).
The '76-9 Pontiac engine TA lid is approx. 14-1/4" wide (AC air filter A542C). Setting the lid on an air filter and taking the difference of the filter to ground and the top of lid (using a straight edge) to the ground is approx. 1". |
|
#5
06-20-2014, 06:52 AM
|
||||
|
||||
|
Thanks HFR I saw that the Olds one is close as well...all I'm interested in though is the dome dimension.....its gonna get cut up...Chris
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
