#1  
Old 01-24-2020, 06:24 PM
cnc's Avatar
cnc cnc is online now
Ultimate Warrior
 
Join Date: May 2005
Location: London,Ont, Canada
Posts: 3,995
Default Parts Place seat belt buckle kit

Anyone use these..I'll looking at the kits and see to designs
I'm trying to measure and compare to there measument size but I'm not sure where to measure from ...they say distance between the pins ...but mine are broken so not sure where they mount in the buckle

__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's
  #2  
Old 01-24-2020, 06:50 PM
Held for Ransom's Avatar
Held for Ransom Held for Ransom is offline
Ultimate Warrior
 
Join Date: Mar 2000
Posts: 8,912
Default

http://www.forums.maxperformanceinc....d.php?t=810022

Look at the buckle and click on my eBay link in post to compare the two designs.

__________________
So long, farewell.
  #3  
Old 01-24-2020, 07:16 PM
cnc's Avatar
cnc cnc is online now
Ultimate Warrior
 
Join Date: May 2005
Location: London,Ont, Canada
Posts: 3,995
Default

Thanks HFR

So I went out and checked my rear belts one was still good except one pin slightly broken to hold it down
Anyway these are the measurements I got slightly different from what they post for first design
1.30 and 0.90
I think I want first design as we r close...
Attached Thumbnails
Click image for larger version

Name:	IMG_0985.jpg
Views:	123
Size:	73.4 KB
ID:	529874   Click image for larger version

Name:	IMG_0986.jpg
Views:	98
Size:	74.3 KB
ID:	529875  

__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's

Last edited by cnc; 01-24-2020 at 07:40 PM.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:00 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017