FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Upper control arm torque spec
Looking for some help with proper torque setting on the two bolts that attach the pivot shaft (or cross shaft) @ upper portion of the upper control arms. For clarification it's the two bolts @ the outside of upper control arm that run through the rubber bushings & attach to pivot shaft.
The vehicle is a '66 Lemans. Last Summer I replaced all of the front suspension/steering components & yesterday rechecked all nuts/bolts for tightness. I found the above mentioned bolts for upper control (both sides) appeared to be a little more than finger tight. That didn't seem right. Does anyone know what torque setting they should be ? Thanks ! |
#2
|
||||
|
||||
40(+-)5 LB FT
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. Last edited by Jeff Hamlin; 03-25-2020 at 08:11 PM. |
#3
|
|||
|
|||
Perfect. Thanks Jeff !
|
Reply |
|
|