[hobbygto65]

WTB driver side horn.

[Drag Star Le Mans]

Originally Posted by hobbygto65

WTB driver side horn.

I have a few and will function test. Do you need a year specific or just functioning?

[PLongen]

Looking for a 63 LeMans power steering pump pulley.
Specs for the pulley would be good too.
Than you,
Pat

[hobbygto65]

I'm kind of wondering now, the horn was for my 63 Lemans but now after looking at my wiring diagram it only shows one horn on the passenger side.

[deanremix]

Still looking g for fenders and quarters for a 61 tempest if anyone has a bead on some lmk

[PLongen]

Found pulley
thanks

[Apsesia]

Looking for a or higher gear ratio rear end for a 1963 lemans. Have a 2.91 in the car now. Have found a 3.30 but was wondering if anyone has any higher. Car is a 326 auto I am in Mooresville nc so if close even better.

[tom s]

They did make a 3.90 gear,had a set in my 63HO car I bought new in 63.I think pretty rare and takes a diff carrier as I remember.Dont know what uother gears were inbetween that required a dif carrier.Tom

[Apsesia]

Originally Posted by tom s

They did make a 3.90 gear,had a set in my 63HO car I bought new in 63.I think pretty rare and takes a diff carrier as I remember.Dont know what uother gears were inbetween that required a dif carrier.Tom

I believe they also had something around a 3.55 and 3.78. Those 3 seem to all be harder to find. I’ve seen a bunch if 3.09.

[firefour1]

Originally Posted by PLongen

thanks for the pictures that helps. All need now is a templet to make the front bracket. It shouldn't be to hard.
Pat

Have attached the photo of the entire assembly. The two black ones are needed, the other two are part of the alternator mounting. Flat plate in the front, angled part connects to the motor mount bracket. The PS pump is fixed in place, the belt is tensioned off of the alternator adjustment. Let me know if there is anything else needed.