#21  
Old 10-26-2014, 08:33 PM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Manassas, VA
Posts: 15,160
Default

Dang flu blew my schedule! But did get a bunch of stuff done.

Got the front suspension done and test fit a wheel/tire. The outer tie rods I got from Rock Auto were not boxed properly, were the wrong parts, had to order another set, should have them Wednesday.

Got the rear detailed, all the rear suspension installed, rear installed, and test fit the wheels/tires. Need to touch up the axle tubes, there was some scuffing during installed, a misting is all it should take to straighten out.

Not going to do the brakes and all until it comes back from the body shop, main goal is to get it rolling and the engine/trans in to limit damage after paint. Should have the engine back in a week or so. Should have it in the body shop within 3 weeks.

A couple pics of progress...

.
Attached Thumbnails
Click image for larger version

Name:	RearInstalled02.jpg
Views:	619
Size:	53.2 KB
ID:	379921   Click image for larger version

Name:	FrontSuspension02.jpg
Views:	570
Size:	55.6 KB
ID:	379922  

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
  #22  
Old 12-27-2014, 04:36 PM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Manassas, VA
Posts: 15,160
Default

Engine and trans installed, going to the body shop this coming week. Sweet. I missed my slot because the engine took a while, machinist had the flu, was a nasty one, glad he cleared that ok.

Finally got to use the G-Force 4L80E swap trans cross member, had that thing for probably 2 years, never installed it. Fits great, and allows for a certain amount of adjustment at the mount, up and down, with shims, to correct driveline alignment. Will get to use my Tremec app on my smart phone for that.

Once it's in the body shop I will clean the garage, ebay a bunch of parts, and get the front & rear seats recovered. I can knock that out in the basement, won't freeze!

Also have to do some minor stuff on the clone, shouldn't be too bad.

.
Attached Thumbnails
Click image for larger version

Name:	EngineInstall01SM.jpg
Views:	532
Size:	48.0 KB
ID:	385600  

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
  #23  
Old 12-28-2014, 11:05 PM
GOAT WHORE's Avatar
GOAT WHORE GOAT WHORE is offline
Ultimate Warrior
 
Join Date: Jun 2008
Location: Oregon
Posts: 2,695
Default

In case you care, my vote is for the atoll blue

__________________
1969 GTO 4spd. Antique Gold/black, gold int.
1969 GTO RAIII 4spd. Verdoro Green/black, black int.
1969 GTO 4spd. Crystal Turquoise, black int.
1970 GTO 4spd VOE Pepper Green, green int.
1967 LeMans 428 Auto. Blue, black int.
  #24  
Old 12-29-2014, 08:20 AM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Manassas, VA
Posts: 15,160
Default

Pretty sure I'm going with Atoll, and was hoping to find a similar color in the Hot Hues line.

.

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
  #25  
Old 03-05-2015, 10:45 AM
GOAT WHORE's Avatar
GOAT WHORE GOAT WHORE is offline
Ultimate Warrior
 
Join Date: Jun 2008
Location: Oregon
Posts: 2,695
Default

Any updates? Have you used those solid body mounts before?

__________________
1969 GTO 4spd. Antique Gold/black, gold int.
1969 GTO RAIII 4spd. Verdoro Green/black, black int.
1969 GTO 4spd. Crystal Turquoise, black int.
1970 GTO 4spd VOE Pepper Green, green int.
1967 LeMans 428 Auto. Blue, black int.
  #26  
Old 03-05-2015, 10:51 AM
Nicks67GTO Nicks67GTO is offline
Ultimate Warrior
 
Join Date: Dec 2008
Location: Waterloo, Ia
Posts: 2,895
Default

subscribed

__________________


-1967 GTO HO Restomod. PKMM 433ci, SilverSport T56 Magnum 6spd, Moser 9", SC&C and a bunch of other pro touring goodies

- Build Thread
http://forums.maxperformanceinc.com/...615847&page=23
  #27  
Old 03-05-2015, 11:53 AM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Manassas, VA
Posts: 15,160
Default

No, never used the ABC mounts before, but it's no-brainer stuff. They fit well, even if the instructions are a little weak. One thing you have to remember is the body bolts that are along the seat pans need to be like a 1/4" shorter than the rest, but no biggie.

Update is, still waiting for my slot in the body shop to open. I missed my original window, and that added like 4-6 months before I could get in. Like most other shops, their' bread and butter is collision work, and with the weather, there have been delays. The one car that is ahead of mine, a '62 GP, is almost done, or is done, I was told to check in tomorrow.

Once I get it up there I will clean the garage, and start collecting other parts. I have everything for the body, so it's mechanical and interior stuff I still need to get. I have like 70-80% of it all, just a few final, big-ticket items I need, like the EFI ECU and the like.

Soon. And a shame now that it prob won't be done until the fall...

.

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
  #28  
Old 03-05-2015, 01:14 PM
pugslyx234 pugslyx234 is offline
Chief Ponti-yacker
 
Join Date: Dec 2004
Location: washington state
Posts: 620
Default

Great thread!

  #29  
Old 03-18-2015, 02:29 AM
cuz68's Avatar
cuz68 cuz68 is offline
Ultimate Warrior
 
Join Date: Dec 2002
Location: Elizabethton, TN
Posts: 3,269
Question

X2 on the great thread, Are you going to put a heater in it..

__________________
Cuz68
  #30  
Old 03-18-2015, 07:28 AM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Manassas, VA
Posts: 15,160
Default

Yeah, I'm torn on either a Classic Auto Air setup or a Vintage Air setup. when I get to that point I will make a selection, but thinking Classic Auto most likely. I've had very good service from them, and pricing is better.

Spoke to the body shop yesterday, they are clearing a spot for my car. They finished the 62 Grand Prix that was ahead of me, and a 66 Buick GS. I may go up tomorrow to get a couple pics of the GP, that thing is sweet. Owner chose a pearl white Caddy color, turned out good. Anyway, there were hang ups on both those projects, which delayed my car getting in there. Just the way things work out in this field...


.

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be

Last edited by HWYSTR455; 03-18-2015 at 07:47 AM.
  #31  
Old 03-18-2015, 08:06 AM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Manassas, VA
Posts: 15,160
Default

Just to be informative...

I use rattle cans for suspension and other area finishing, for a number of reasons. One, later down the road, it's easy to touch up, and that's a big factor. I learned when doing the clone that it's not easy to find matching shades of rattle paint, and found that it's best to stick with one brand. Also, when trying to make sure different paints are compatible, it's best to stick with the same type of paint, be it epoxy or whatever. You don't want to find out after that you now have to strip a large section of something because you shot lacquer over acrylic or something.

Anyway, what I use is Dupli-color Engine paint, semi-gloss black. Can get it everywhere, readily available, not too expensive, and as my body guy says, sticks to anything. Don't have to worry about it catching fire either! Fairly good about repelling solvents and chemicals too.

I looked at a bunch of the bed liner stuff too, and originally bought some roll-on stuff, think it was Rhino-liner. But, that stuff is a pain to apply, need a bunch of rollers and different sizes, and it's still hard to get into some areas. So, luckily, there are aerosol ones. I didn't want one that would be 'rubbery' either, or one that would come off easy. And what I ended up with is the Dupli-color Bed Coating. I tried the Rust-oleum one too, it's fine, but it's a little more expensive and a little harder to find. I was able to get the Dupli-color one on sale for $7 a can, which is a pretty good deal, think normally they're like $10-12 a can.

I've gotten good results with my rattle can approach, and for a driver-quality car, it works, looks good, lasts, easy to touch up, and makes parts/areas last longer.

I'm curious how other approach this on a driver-class car, and would like to hear opinions/suggestions/comments...

.

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
  #32  
Old 04-25-2015, 09:55 AM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Manassas, VA
Posts: 15,160
Default

FINALLY!! Spot opened up in the body shop, and got the car up there! Here's a shot of it on the rollback:

Hope PY gets the site figured out, looks like all my previously posted project shots are now gone...

.
Attached Thumbnails
Click image for larger version

Name:	LeMansTow01.jpg
Views:	33
Size:	121.2 KB
ID:	396020  

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
  #33  
Old 04-25-2015, 12:15 PM
JSPONT's Avatar
JSPONT JSPONT is offline
Ultimate Warrior
 
Join Date: Jul 2014
Location: ROCKY POINT NY
Posts: 2,917
Default

You did not have old rims to put on? Those are real pretty and overspray clean up sucks!! Congrats. Hope they finish it fast.

  #34  
Old 04-25-2015, 12:36 PM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Manassas, VA
Posts: 15,160
Default

Gave the old wheels to a board member, but the shop does have 'shop' wheels they will put on it.

Those are the US Mag ones, 18s, I like them, and will look good once it's done.

.

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
  #35  
Old 04-27-2015, 09:40 AM
2002Z4CSS's Avatar
2002Z4CSS 2002Z4CSS is offline
Ultimate Warrior
 
Join Date: Jun 2009
Location: Westland, MI
Posts: 3,782
Default

Those wheel are what I want to run on my GT-37. They look great!

__________________
1971 Pontiac GT-37

Car is a junk yard dog and maybe one day will be restored.
  #36  
Old 04-27-2015, 02:07 PM
pontibeast's Avatar
pontibeast pontibeast is offline
Chief Ponti-yacker
 
Join Date: Jan 2015
Location: Blue Ridge Mountains, VA
Posts: 653
Default

Quote:
Originally Posted by HWYSTR455 View Post
Gave the old wheels to a board member, but the shop does have 'shop' wheels they will put on it.


.
Just got the wheels straightened and I am waiting on tires. I will post pics once I get them on. Thanks again for the really nice wheels. Glad they got you into the body shop and I can't wait to see it when it's done.

  #37  
Old 04-27-2015, 02:23 PM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Manassas, VA
Posts: 15,160
Default

Glad to hear! Should be cake to get them polished out too! Nice to see they will get good use!


.

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
  #38  
Old 05-28-2015, 12:20 PM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Manassas, VA
Posts: 15,160
Default

Stripped, can see the previous work that was done, thankfully it wasn't as bad as I thought it would be. I was sweating they made a mess of the whole panel, this can be done with a patch.

Can see some of the work already done on the trunk lid and quarter end, they are trying to keep busy until the quarter patch panels come in.

Roof was saved from a good coat of POR-15 like 15 years ago, no major work needs to be done anywhere. One door has a small spot in the lower rear corner where previous repair work needs to be corrected, nothing big.

Some minor window channel work as usual, again, nothing big.

Another 2 - 3 weeks and it will be further along, I will go up and grab some more shots then...

.
Attached Thumbnails
Click image for larger version

Name:	LeMans-Body01.jpg
Views:	521
Size:	110.5 KB
ID:	398969  

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
  #39  
Old 05-28-2015, 01:01 PM
Interceptor's Avatar
Interceptor Interceptor is offline
Senior Chief
 
Join Date: Oct 2014
Location: Calgary, AB
Posts: 265
Default

Quote:
Originally Posted by HWYSTR455 View Post
. . . the styling is killer . . .
Agreed :-)

What trans? Are you mating the 4L80E up to the Pontiac 461? How? Is there room in the tunnel?

__________________
70 GTO Restomod -- 400/200-4r, nothing to see here
70 Firebird -- 455/400
69 Mach 1 -- 390-C6
07 Escalade EXT
  #40  
Old 05-28-2015, 02:32 PM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Manassas, VA
Posts: 15,160
Default

Quote:
Originally Posted by Interceptor View Post
Agreed :-)

What trans? Are you mating the 4L80E up to the Pontiac 461? How? Is there room in the tunnel?
Yes, 4L80E, the one I had in there for like 7 or so years I had freshened up by CK, was fully operational. I went to a new converter, wanted less stall. Considering going to a different rear gear as well, drop from the 373 to like maybe a 331, haven't decided.

If you search here, I did an install thread when I originally bought it, listed all that was needed to complete the install. Definitely one of the best upgrades I can recommend to anyone.

Here it is:

http://forums.maxperformanceinc.com/...ighlight=4L80E

.

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:49 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017